How teeth are filled (types of filling materials).

If you are thinking about dental implants, where the main requirement is a quick installation with minimal discomfort, then the choice is obvious: use XiVE Friadent implants. Installing such an implant will take no more than an hour, and a wide range of abutments will allow you to choose the most optimal option.

Regardless of the type, any implant in the Friadent Xive line has a porous surface, which is necessary for its strong fixation. The bone grows into the “pores” of the implant, making it stable, so it takes root faster than implants from many other manufacturers.

Types of Friadent Xive

1. Regular. Suitable for the classical method of prosthetics.
2. Thin. An excellent option for one-stage prosthetics, when the bone is loaded immediately after implantation.

Depending on the type of prosthesis with which the implant is going to be loaded, there are those that are suitable for installing single crowns, and others for large prostheses.

Comparison of cost with analogues

XIVE Friadent implant range

XiVE S plus Friadent

In many cases it is chosen for single restorations or as a retainer for bridges. The implant from Germany is placed using the traditional method in two stages. First, the implant is inserted, and after a few months an abutment and permanent crown are placed on top. The rehabilitation period will be 2-3 months.

Pros:

• high structural strength;
• 100% similar to natural teeth. Provided that the FRIADENT CERCON abutment is used;
• suitable for complex operations;
• a wide selection of abutments allows you to install an implant even after a long absence.

XiVE TG Friadent

Unlike XiVE S plus, the installation of this implant is carried out in one stage using non-surgical implantation. This will save your time and reduce the trauma of the operation.

Installation of XiVE TG is possible if there has been recent tooth loss for no more than 3 months.

Pros:

• installation of the implant will take 10-15 minutes;
• the rehabilitation period will be 1 month;
• high structural strength.

Xive 3.0 Friadent

The designation 3.0 indicates the diameter of the implant. It is recommended to install it in case of problems with bone structures, as well as when installing dentures on the front teeth. Apart from the small diameter, it is no different from older models.

Dental materials - Instruments - Equipment

We welcome you to our dental online store!

Our company is a partner of large suppliers of dental products and sells: high-quality dental consumables, instruments, dental equipment, hygiene and disinfection products from the world's leading manufacturers from a warehouse in Moscow. Our goal is to organize delivery of products to a doctor’s office in any region of the country in the shortest possible time and at the best prices! Our prices are a permanent super offer for clinics throughout the country - “Moscow prices in your city!” (You buy according to the price list and only pay for delivery through the transport company). > > >

Sale of dental materials and instruments is carried out only with delivery.

Eurodent-M is a dental store in Moscow, your reliable partner with a proven reputation over the years! We have been working for Bac since 2008.

To order goods, you can use the online ordering system or contact the manager by phone in Moscow (495) 517-86-75, 514-86-13 (Mon.-Fri. from 9.30 to 17.30 >

Prices are valid for January 2022.

Dental materials, dental instruments, dental equipment - you can buy all this from us! Call! Order! >

One of our highlights is burs

. We have a large selection of them! An employee will come to your clinic with catalogs of real hogs! Call!

You can see delivery information in the Payment and Delivery section.
href=»> > > > style=»font-size:> style=»font-size:> style=»font-size:> style=»font-size:> style=»font-size:> > > > style=»font-size:>
Call

Send SMS

Call from mobile

Add to Skype

You'll need Skype CreditFree via Skype

pros

Advantages of the German Friadent Xive implant:

• Porous structure, due to which the implant healing time is reduced by 1.5-2 times.
• Instant loading of the implant is possible immediately after its installation.
• Using computer modeling, it is possible to predict the results of implantation.
• The implant is installed using special tools developed by the same company, so the whole process is quite quick and painless.
• Low risk of implant displacement at the beginning of the rehabilitation period, when it has not yet had time to fuse with the bone.
• A large selection of implants in the line allows you to choose the appropriate option for patients with a wide variety of structural features of the dentofacial apparatus.

In addition, there are no age restrictions for installation. It can be installed for any condition of the jawbone.

FRIOS opens the way for autogenous bone regeneration

Autogenous bone tissue from patients is still the “gold standard” for augmentation. And we think that's right. Therefore, in the FRIOS range we offer, with the help of the practice-tested operating instruments "FRIOS-OP" (" FRI ADENT O sseous Reconstruction System ") and with the help of the bone substitute "FRIOS Algipore", everything that is necessary for the reliable replacement of bone tissue defects: from bone harvesting through bone tissue transplantation and until successful bone tissue regeneration.

• "FRIOS MicroSaw" (according to Professor Khor) for minimally invasive bone tissue preparation
• "FRIOS BoneCollector" for collecting valuable vital bone chips
• "FRIOS BoneShields" for protective and formative coating of bone defects
• "FRIOS" membrane pins for secure fixation
• "FRIOS Unit S/i" device for augmentation and implantation surgery
• "FRIOS" straight and contra-angle handpieces for maximum freedom of action when preparing bone
• "FRIOS SinusSet" set for all preparation steps during sinus lift surgery using the open technique

The FRIOS product line, like all DENTSPLY Friadent Sirona products (Dentsply official website), are developed together with practicing physicians for practicing physicians. In the development of all these products, the focus is on simple and easy use: always for precise, successful and fast work.

Minuses

However, Friadent Xive implants also have relative disadvantages. All implants in this line are quite expensive. In addition, the cost of a crown or dental bridge must be added to this amount.

For some patients this will be a problem, but it can be solved by taking out an installment plan for implantation, that is, paying the amount in installments.

You may also have difficulty finding a specialist who works with this line, which is problematic precisely because of its high cost. But, nevertheless, finding a clinic that performs implantation using these implants is a feasible task.

Galvanic crowns

Tooth reconstruction in aesthetic dentistry can be carried out using galvanic materials. Electroplated crowns are a ceramic design with a gold cap. This cap is necessary for the formation of the desired shape, and it also closes the space for pathogenic microflora to enter. Despite the presence of gold in such a crown, it fully matches the color of a natural tooth.

Today, galvanic crowns are very popular, and more and more dentists are recommending them to their patients. It is not only aesthetically pleasing, but also safe. This compound does not cause allergic reactions.

If previously it was popular to whiten teeth for their aesthetic appeal, today more and more dental clinic clients are choosing restorations, questioning the safety of in-office whitening. After all, it is reliable, durable and does not entail serious problems.

There are many more good examples of aesthetic restoration, but the proposed options have already shown the possibilities of dentistry. Composites, galvanic materials, ceramics are proven and safe materials.

Caring for Xive Friadent implants

Brushing your teeth twice a day and visiting a dental hygienist is the bare minimum to ensure the health of your implant.

As a toothbrush, you need to use an electric brush with pulsation technology. It is also worth considering purchasing an irrigator; it irrigates the interdental spaces and other hard-to-reach places in the oral cavity with a stream, removing plaque. Follow these simple rules to ensure the safety of your XiVE Friadent implant.

Electric brush with pulsation technology

A few words about the guarantee

When installing an Xive Friadent implant from Germany, be sure of its high quality. The manufacturer provides a lifetime warranty on dental implants and components made of titanium. And five years for components using zirconium.

The advantages of a Friadent implant are obvious; implants are as close as possible to natural teeth. In this case, there is no need to grind adjacent teeth. But what is important is that you quickly get used to the implants, there is no feeling of a foreign body in the mouth, food does not stick to the dentures, and the high quality of the materials means you are not afraid of the implant breaking.

Advantages of ceramic inlays and veneers:

• after restoration with ceramics, there are no side effects; this material does not conduct heat and therefore does not change its structure;
• the material is strong enough for restoration (restoration) of both frontal teeth and teeth with high chewing load;
• ceramics are strong enough to replace a significant defect in the contact surface, precisely in the place where low-quality fillings often fall off;
• installing a ceramic structure does not require much sharpening of the tooth, which allows you to maintain its strength and avoid abrasion;
• ceramics interact perfectly with tooth tissues and are not rejected by them.

The greatest value of ceramics in aesthetic dentistry is that this material can take any shape. This suggests that it is ideal for filling, veneering, and creating dentures.

Indications for installation

Orthodontic structures from this company are used in many different, and sometimes extremely difficult, clinical situations.

XiVE implants are used for various types of implantations:

• two-stage (classical);
• transgingival (based on a puncture and without tissue incision);
• with pathology of bone tissue;
• with narrowness of the alveolar ridge;
• to restore the 6 front teeth in the “smile zone”;
• if it is necessary to achieve maximum aesthetics of implanted teeth (for people in public professions);
• in complex clinical situations when implants from other companies cannot be used.

Xive designs can be recommended to patients in the following cases:

• in the absence of single teeth (allows you to keep adjacent teeth intact);
• complete absence of teeth (by installing fixed dentures or for subsequent fixation of removable structures);
• absence of end teeth in a row;
• periodontal diseases (periodontal disease);
• elderly patients;
• with insufficient volume or density of jaw bone tissue.