Cost of dental veneers and features of their installation

Do you dream of a flawless Hollywood smile? Do you want your teeth to be perfectly straight and white, like those of Insta stars and celebrities? This is possible, and even for a very reasonable budget. At the 32 Dent clinic, you can completely restore your teeth using high-quality and modern veneers. Just a couple of visits to the dentist’s office - and you will get the same result that will pleasantly impress you and those around you!

Veneers are thin overlays 0.2 - 0.7 mm thick, which are fixed to the outer surface of their teeth using a special adhesive. They can also be called microprostheses, plates, prostheses, but the essence does not change. This is the most effective method in a couple of visits to the dentist to transform unaesthetic teeth into absolute perfection in color, shape and transparency!

This is interesting! The very first dental veneers appeared at the beginning of the 20th century in the USA, and they were intended for Hollywood stars (hence the phrase “Hollywood smile”). Initially, these were unnaturally white and rough in structure ceramic plates of impressive thickness, which made their teeth larger - it was visually noticeable that there were dentures in the mouth.

Modern designs are more advanced, but at the same time they look natural and aesthetically pleasing. You can easily verify this by looking at examples of the work of doctors at the 32 Dent clinic. The result will impress you!

Who is recommended for veneers and who is not?

In principle, any patient can get dental veneers if they have the funds and the desire. Most often, veneers are installed on teeth for the following reasons:

• not satisfied with the natural color of your teeth;
• there are stains or microcracks on the tooth surface that you want to disguise;
• if there are three (small distances a few millimeters wide);
• in cases where teeth are prone to increased wear at the edges;
• if there are minor orthodontic defects, for example, the tooth is slightly rotated, or mild crowding is diagnosed.

Note!
Even the most modern whitening technologies are not able to give tooth enamel such impeccable whiteness as microprostheses. That is why more and more patients are inclined to install veneers and make their dream of incredibly beautiful teeth come true! Like any restoration procedure, the installation of veneers has its contraindications. It will not be possible to install dental microprostheses if:

• the patient suffers from bruxism - otherwise, microprostheses will constantly break;
• when your teeth are loose and in poor condition, prosthetics will help here (possibly together with implantation);
• if the enamel thickness is insufficient or it is destroyed, then the microprosthesis will not hold;
• the teeth are naturally underdeveloped, too small - the structures simply will not be fixed on the surface;
• there are acute diseases of the ENT organs, problems with the heart and blood vessels, tumors, etc.

Relative contraindications are problems with bite and caries - these issues can be treated, and only after that you can work on the aesthetics of your smile.

Note! If a tooth has been restored by more than 60%, it has a large filling, and it is not advisable to install onlays on it. This can lead to subsequent destruction of the crown, and the patient will already spend a considerable amount on the installation of dental microprostheses. Perhaps in this case, prosthetics at the 32 Dent clinic will help.

Ultraneers

Ultraneers

They appeared relatively recently and serve as a good alternative to American lumineers. This type of onlay was developed in Russia based on patented ceramics of the IPS E. MAX brand.

Using modern technologies, pressed ceramics are produced from which ultra-thin plates are created - ultraneers.

Pros of ultra training:

• high aesthetics - the color of the lining can be matched exactly to the natural shade of the patient’s teeth;
• It can also be installed on sensitive teeth, since the grinding of the supporting tooth is minimal or not done at all;
• strength is 40% higher than that of ceramic veneers;
• since this is a completely Russian development, the cost does not depend on currency fluctuations and is therefore lower than the cost of lumineers;
• no need to wait several months before installation, since the product is manufactured in Russia;
• service life is about 15 years.

A significant disadvantage of ultranir is their high cost. They are 2 times more expensive than veneers, although they are produced in Russia. However, the cost of ultraneers is 30-40% lower than the cost of American lumineers.

What you need to be prepared for when deciding to install veneers on your teeth

Unfortunately, patients are not always aware of all the points associated with these structures.

1. The crown must first be ground. In most cases, when installing veneers, the enamel must be prepared (remove a microscopic layer) - otherwise, the overlay will stick out and provoke an unattractive effect. But in this case, you can choose an alternative - ultra-thin lumineers, which are attached to the enamel without pre-turning, but at a price - they are much more expensive than conventional onlays.
2. Not for life! When deciding one day to put veneers on your teeth, be prepared that in a few years you will have to replace them with new ones. Even the best pads won't last a lifetime. If we are talking about composite veneers, they will have to be replaced after 5 – 7 years.
3. Beware of caries! Unfortunately, even the best and well-installed structures do not guarantee that caries will not develop under them. Therefore, experts recommend that patients with veneers monitor their oral hygiene even more carefully and undergo regular preventive examinations in the clinic.
4. Pleasure is not cheap. This is not only about the beauty of teeth, but also about the need to invest periodically. So, for example, if one pad breaks or comes off, it will have to be replaced with a new one, which also costs money. However, by investing in your health and beauty, you get much more!

Cost of the procedure

An important aspect is the price of veneers. The cost of one tooth is calculated individually in each specific case and depends on the material from which the onlay is made. The reputation of the orthodontic clinic and the qualifications of the specialist who performs the installation are of great importance.

Price for 1 tooth

Therapeutic designs are also called direct; they are considered cheaper and accessible to most segments of the population. Installation is carried out in one step using simple composites. The procedure is similar to filling. If your teeth need treatment, you will need to visit the orthodontist several times.

The price of one pad depends on the place of residence of the person. So, in Moscow you will have to pay about 5.5 thousand rubles for one veneer. In other regions of Russia, the cost fluctuates around 3 thousand rubles. You can save money on aesthetic dentures in public dentistry or by using promotional offers from private companies.

Prices for orthopedic products vary greatly. This depends not only on the reputation of the medical institution and place of residence, but also on the surface of the dental structures that need to be processed and covered with a plate. Materials also need to be taken into account:

• Glass ceramics - 17 thousand rubles.
• Lumineers - from 32 thousand rubles.
• Ceramics - from 13 thousand rubles.
• Zirconium overlays - from 23 thousand rubles.

At the same time, lumineers and zirconium veneers are not installed in every region due to their high cost. Ceramic structures are the most in demand, so there is a lot of competition for such products.

In some situations, after installing veneers, your gums begin to hurt. There is a possibility that some violations were made during the procedure or the product was installed incorrectly. If discomfort occurs, you should consult a specialist.

Front teeth

Due to the fact that the veneering procedure is necessary to correct the aesthetic characteristics of a smile, veneers are often installed on the 8 lower and 10 upper teeth. In addition, sometimes some elements with damaged enamel or chips are subject to adjustment.

That is why the clinic cannot immediately say specifically how much it costs to install veneers on the front teeth. The price directly depends on the characteristics discussed above (materials, clinic, etc.).

What types of veneers are there? Which is better to choose?

Conventionally, three groups of restoration structures for teeth can be distinguished, if we take into account the specifics of their installation:

1. Direct – plates that are installed directly in the dentist’s chair. The specialist first grinds the tooth, after which he applies the composite material layer by layer - by analogy with artistic restoration. As a result, it is possible to obtain a beautiful “new” tooth in shape, color and transparency. The main advantage of direct overlays is their price. The main disadvantage of direct structures is that over time, the composite material still darkens, turns yellow, and the aesthetics are no longer the same.
2. Indirect - onlays that are made in advance using impressions taken from the patient’s ground teeth. After the plates are ready, they are tried on the prepared teeth, and then they are fixed using an adhesive composition. While the veneers are being produced in a laboratory, special temporary structures are placed on the patient’s teeth (similar to temporary dentures). The main advantage of indirect solutions is that they are more durable and do not change their color and transparency throughout their entire service life. The main disadvantage of indirect overlays is their high price compared to composite plates.
3. Semi-direct – a combination of the two technologies listed above. First, impressions of the patient’s teeth are taken, and new onlays from composite material are made in the dental laboratory. The main advantage of semi-direct veneers is that their fixation to the teeth is considered more reliable. The main disadvantage of semi-direct options is that composite linings still last no more than five years; over time, they will have to be replaced with new ones.

As you can already understand from our examples of clinical cases, dentists distinguish two categories based on the material of manufacture:

1. Composite – dental onlays made of filling composite. In some cases, they can be installed without first grinding down your tooth. For example, when there are microscopic cracks in the enamel, or the patient is not satisfied with the shade of the tooth enamel. A thin layer of composite material will mask these moments and allow you to achieve ideal whiteness of your teeth. There will be no visible transitions from the composite composition to the native tissues of the tooth enamel.
2. Ceramic – dental plates made from dental ceramics. More advanced solutions in terms of creating ideal tooth shapes. They will help to align and achieve ideal anatomical proportions of teeth, since the structure of the material is as close as possible to the characteristics of natural enamel. At the same time, the price of ceramic analogues is three or even five times higher than the price of classic composite overlays.

Which veneers are best to choose? The question is strictly individual. To answer this, the dentist must:

• assess the condition of the patient’s teeth;
• see the condition of the jaw and exclude serious orthodontic abnormalities;
• find out the goals pursued by the patient who wants to install linings from a particular material;
• roughly be aware of the allocated budget for smile restoration.

It is important! In case of severe curvature of the teeth or pathologies of the jaw, guilt is undesirable. But the patient can always straighten the teeth first and then install veneers to get the picture of their dreams.

As practice shows, ceramic structures are still more preferable. Firstly, this is quality that will prove itself within 20 years. Secondly, it is reliable; teeth will not darken from coffee or cigarettes in a year. Thirdly, if you calculate the budget for installing composite systems every 5 years, then installing ceramic veneers is more profitable from a financial point of view.

Among the most common ceramic veneers, we note 4 directions:

1. Zirconium dioxide dental veneers – the main part is made of zirconium alloy, and the top is coated with dental porcelain. They are considered one of the most reliable and durable, but in terms of their tint range and transparency they may be inferior to glass ceramic linings;
2. Made from glass ceramics – so-called metal-free plates, which are made in a dental laboratory from pressed glass ceramics. The most popular plates you may have heard of are E Max CAD and E Max Press;
3. Porcelain dental veneers are the “gold standard” of designs that combine optimal price and quality. Dental porcelain is the same ceramics, but with characteristics closer to natural enamel;
4. Ultra-thin or lumineers are dental onlays approximately 0.02 millimeters thick. They are considered the thinnest, their installation does not require preliminary grinding of the enamel, but their cost is several times more expensive than classic porcelain ones.

Advantages and disadvantages

Every year, the veneering procedure becomes more popular in dentistry. Its demand is due to certain advantages:

• The product covers all tooth surfaces, which minimizes the risk of accidental chips.
• High reliability of the design, which is achieved due to the use of modern materials.
• There is no need to remove the nerve. The exception is cases when inflammatory processes occur in the canals.
• The ability to correct malocclusion or crooked teeth in the early stages without the use of various orthopedic systems or braces that disrupt the aesthetics of the smile.
• The absence of metal elements promotes biological compatibility with tissues. In addition, the risk of allergic reactions is minimized.
• Possibility to choose products to match natural teeth.
• Long period of operation. High-quality systems last 10-15 years.
• The structures are resistant to deformation.
• The color does not change during the entire service life.
• Protecting tooth enamel from damage, exposure to pathological microflora and other negative factors.
• You can install structures both on one tooth and on the entire row.

This procedure has certain disadvantages. Some of them:

• Limited product life.
• The presence of composite materials in the composition that tend to darken and are excessively brittle.
• Increased requirements for oral hygiene.
• High price of products even when installed on 1 tooth.
• Various contraindications.
• There is a risk of changes in diction and discomfort if the teeth are seriously crooked.
• The need to handle veneers with care, as injuries can break the product.

Installation principle for 1 tooth

Installation of veneers: features, important nuances that the patient should know better about

The indirect method involves 3 steps:

1. Preparation. First, the tooth enamel is ground down a few tenths of a millimeter - a thin layer of enamel is removed. Then the dentist makes impressions of the patient’s also prepared teeth, after which he covers them with special protective caps - for the period of time while the veneers are produced in the laboratory;
2. Visualization. Computer model with “before” and “after” effect. In a 3D program, the dentist creates a virtual model of teeth and clearly demonstrates how it was and how it will be after. The picture is usually impressive and motivating;
3. Installation of veneers - your new perfect smile is ready! The dentist fixes the onlays on the tooth enamel, and the patient evaluates the final result.

Installation of microprostheses using the direct method also involves 3 steps:

1. Preparation. The dentist removes a small layer of tooth enamel for the patient and prepares the teeth for further restoration;
2. Installation of composite structures. Layer by layer, the dentist distributes the composition over the surface of the enamel, while each of them is illuminated with a lamp to “seal”;
3. Polishing and finishing to perfection. The enamel surface is carefully polished, the shape of each tooth is brought to perfection.

Lumineers

Lumineers

A new direction in aesthetic dentistry has recently been the installation of lumineers . They are also called Hollywood teeth veneers. American manufactures and supplies such linings.

The plates are made from high-strength ceramics, the plate thickness of which is only 0.2-0.3 mm.

Installing lumineers, unlike ceramic veneers, has a number of positive aspects:

• before installing ultra-thin veneers, no heavy grinding of the tooth is required; only a minimal layer of enamel is removed;
• since the installation procedure does not require tooth preparation, therefore, it is painless and does not require anesthesia;
• resistance to mechanical loads, do not wear out over time;
• these linings are glued to a special composition insoluble in saliva, which contains a substance - fluoride, which has a beneficial effect on the teeth, and thereby protects against secondary caries;
• the ability to choose the color of the lining identical to the natural color of the patient’s teeth;
• The service life of such veneers is up to 20 years.

Despite the advantages of lumineers, there are also disadvantages:

• since lumineers are produced only in one place - in America, patients have to wait about 2 months before installation;
• The cost of installing one lumineer is several times higher than the cost of a veneer.

Price question: how much does it cost to install veneers?

As we already said, dental veneers are not cheap, but they are worth it!

Approximate cost of microprostheses:

• Composite ones are the most budget-friendly. The cost of one unit is approximately 7 thousand rubles;
• Ceramic microprostheses, which are manufactured in a dental laboratory, cost approximately 20 thousand rubles per unit;
• Ceramic dental veneers made at the 32 Dent clinic will cost the patient about 15 thousand rubles per unit;
• Lumineers are the most expensive - from 50 thousand rubles per unit.

Installation process

Regardless of the purpose of installation and the type of overlays, the procedure is carried out according to the same algorithm. Main stages:

• Preparatory activities. This includes diagnosing teeth for the presence of fillings that require replacement. This is necessary not only to increase the service life of the products, but also to improve the adhesion of the veneer to the filling material.
• Determining the shade of the overlays. For this purpose, a special scale is used, and the orthodontist considers possible options taking into account the patient’s wishes.
• Enamel polishing. Immediately before installing the onlays, you need to remove a layer 0.5-0.7 mm thick from the outer part of the teeth. The material of old fillings also needs to be ground, the thickness is determined by the dentist depending on the specific case. For high-quality installation, in some situations it is permissible to remove 1.5 mm of enamel.
• Taking impressions for subsequent sending to a dental laboratory.
• Installation of a temporary plastic structure. This is necessary to protect the ground teeth from external irritants.
• The manufacturing process in the laboratory does not involve patient participation. It consists of producing a plaster structure of a certain area of ​​the jaw based on casts, which allows you to make veneers, taking into account all the individual characteristics of a particular maxillofacial apparatus. The production technology depends on the specific material.
• Pre-installation of the product on a special paste. This is a very important step, because different drugs differ in color. The specialist must select them so that the structure acquires the desired color. In most cases, several types of products are mixed so that the products do not differ from natural dental units.
• Final fastening with cement. This is the final stage of work, after which it will be impossible to correct the color or shape of the structure.

Veneers are a fairly simple way to get a beautiful smile. All design flaws and contraindications for use should be taken into account. It is important to note that if a person decides to install dental plates, it will be impossible to return everything back, because the ground units require constant protection with third-party materials. In addition, you should understand that installing veneers is an expensive procedure that not every average person can afford.

How can you save on installing veneers?

There are two ways to go. Place veneers on individual teeth for the patient. For example, for 10 units of the upper jaw - provided that your teeth are in good condition. You can whiten the enamel of your teeth, but the result will not always be perfect.

There is also a solution to take advantage of the favorable conditions of clinics. Thus, 32 Dent dentistry regularly holds promotions and special offers for the installation of veneers. There are opportunities to install dental microprostheses at a discount of 15% to 50%. The quality of work is at the highest level, as are the guarantees.

Rules for hygienic care of veneers

If proper care is followed, veneers can serve their owner for up to 15 years. In order not to lose microprostheses before this period, experts advise:

• do not bite nuts or crack seeds;
• brush your teeth twice a day, use an irrigator;
• rinse your mouth after eating;
• do not use toothpicks;
• Visit the dentist for a preventive examination twice a year.

The dental network offers services for aesthetic dental restoration with the installation of veneers. Our specialists are proficient in modern prosthetic techniques and regularly improve their professional level in Russian and foreign clinics. We have a system of family and cumulative discounts.

You can contact any of the branches of our dentistry in Moscow, located within walking distance from the metro:

• Art. Alekseevskaya (VDNKh district, etc. Mira), address: st. 3rd Mytishchiskaya house 3, building 2;
• Art. Shelepikha, address: Shelepikhinskaya embankment, address: building 34, building 1.

The smile of your dreams is achievable. Our specialists will make your wishes come true. Waiting for you!

Hit list of questions and answers about veneers

Do veneers ruin your teeth?

Answer: teeth are spoiled by carious lesions, neglect of hygiene rules, lack of regular visits to the dentist, poor nutrition, and bad habits. Veneers, made of first-class material and installed by a professional dentist, on the contrary, protect the enamel from harmful external influences.

Is it painful to install?

Answer: no, it doesn't hurt. The procedure is performed under local anesthesia in a comfortable environment. It is important! There is no need to remove dental nerves during installation.

How long will it take to install?

Answer: on average, from 5 to 14 days or 2 to 3 visits to the dentist’s office.

Dental clinic "32 Dent" specializes in the installation of dental veneers on a turnkey basis. Both budget-class microprostheses and premium solutions are available, including patented American lumineers. Schedule an initial consultation with your doctor to choose the best path to restoring your smile with veneers. The smile will be beautiful and at the same time natural. Take action!

Indications and contraindications for installation

Indications:

• Minor enamel defects - chips, cracks
• Pigmentation of the enamel layer that cannot be lightened
• Slightly crooked teeth
• Slight crowding of teeth in a row
• Unattractive shape of dental elements (or their small size)
• Enlarged interdental spaces (diastemas and trema)
• Increased abrasion of the enamel layer

Contraindications:

• Complex occlusion defects
• Diseases of teeth and gums (temporary ban)
• Severe destruction of the prosthetic element (more than 45%)
• Passion for hazardous sports (boxing, hockey)
• Bruxism

Note: if the patient is ready to wear a mouthguard every night at night, then veneers can be installed for bruxism.

Composite veneers: price for 1 tooth in Moscow

2. Composite veneers are one of the most affordable variations, which are used less and less in modern dentistry. The drop in demand for veneers made from composites is explained by a significant number of product shortcomings, including low aesthetics and minimal useful life. But restorative procedures with composite veneers are carried out using a gentle method and quickly. The type of dental veneers under consideration is also attractive because of its affordable price. The cost of one composite veneer in our Vanstom clinic in Moscow is from 7,050 rubles.

What happens to the teeth under the structure?

When the stitching is carried out correctly, and the design of the micro prosthesis is installed correctly, then nothing happens. However, if a plate, for example a composite, is not fixed tightly, caries or plaque accumulation may appear in such areas.

In case of plate defects, it is necessary to restore the micro prosthesis.

The downside is that it is impossible to remove the veneers; only the structure is replaced.

Most dentists provide a one-year warranty after installing the onlays.

Free consultation on the cost of treatment in our dentistry

Leave a request and the clinic administrator will contact you within 15 minutes!
In terms of cost, composite veneers will be the most inexpensive option; the exact cost of making an onlay for one tooth will depend on the production method. The most expensive is a composite veneer created from an individual impression - you will have to pay 10 thousand rubles or more for it.

If you want to save on the cost of installing composite veneers, you can resort to restoration with direct (layer-by-layer) onlays, which are created directly on the patient’s teeth during a visit to the orthodontist. However, cost savings will ultimately be questionable: direct veneers are neither aesthetically pleasing nor durable, and often change their color under the influence of external factors.

Calculate the cost of treatment by taking a short test in 20 seconds!

Do not delay your treatment, because in this matter time plays against us.

Porcelain veneers

Porcelain plates are visually indistinguishable from the enamel of a normal tooth. Therefore, ordinary people will never guess about the installed records.

The advantages of ceramic crowns are that they are resistant to stress and practically do not stain.

Porcelain microprostheses are made using two methods:

1. Pressed ceramics - the material is applied in layers, then each layer is fired. In this case, the teeth are not ground down.

2. Pressed material – ceramic material is pressed under pressure and then fired at high temperatures. This method is used to achieve the strongest possible structure.

How to make porcelain veneers is decided by the doctor, based on the individual characteristics of the patient.

Plus, the service life of ceramic restorations is more than 20 years. If you decide to put veneers or crowns on your teeth, follow hygiene procedures.

Methods for making ceramic veneers

Ceramic plates are produced using layer-by-layer technology or injection molding. With the layer-by-layer method, the porcelain mass is applied in stages, layer by layer, and then fired to increase its strength and durability. With injection molding, veneers are made under high pressure and temperature, which allows you to obtain finished prostheses of increased strength. If you want to get a reliable and durable result of artistic restoration, we recommend choosing cast veneers.

Both product options are aesthetic and durable, but the useful life of pressed ceramic veneers is significantly longer. The price of porcelain veneers is high and can vary depending on the type of material used in the manufacturing process.

Veneers are ideal in the following situations:

• when the crowns of the front teeth do not have a beautiful shape, have an incorrect slope or occupy an uneven position in the dentition,
• when there are fillings on the front surface of the front teeth that are visible,
• when you need to quickly correct slight crowding of teeth,
• when you need to quickly correct wide gaps between teeth,
• unsightly tooth color that cannot be corrected, for example, using chemical whitening techniques.

Veneers, which have first-class aesthetics and can last from 12 to 25 years (without darkening or changing their color), are made only from ceramics. In economy class and mid-price clinics, the cost of such veneers starts from 25,000 rubles and can reach 50,000 rubles (for 1 unit). And for composite veneers, which have a much more modest aesthetic, the price will be only 8,000 rubles. See detailed price list for veneers below.

E-max ceramic veneers and zirconium dioxide

Metal-free veneers contain a frame made of lithium disilicate or zirconium dioxide. Such plates are almost transparent and have a fine structure. And unlike others, their service life increases to 25–30 years.

Pros of ceramic zirconium veneers

• Duration of operation is longer than that of porcelain;

• Lithium disilicate plates look natural, regardless of lighting;

• Color does not change after eating food coloring;

• Do not accumulate plaque if the rules of oral hygiene are ignored;

• Does not have a black coating when smoking;

• They are light in weight and thin, so wear off of the enamel is minimal.

Zirconium veneers, unlike composite plates, are placed on teeth, even in the most difficult clinical cases. Usually, they are inserted in the smile zone - on the 10 upper and 8 lower teeth.

The downside is that the insertion process takes longer due to the fact that the material is difficult to fix on the tooth surface.

Installation requires minor tooth grinding.