Implants from Sweden Simpl Swiss (Simple Swiss)

1347

Modern prosthetic structures are devices that meet all the requirements of orthodontics. They must not only completely replace the functionality of a lost tooth, but also have a high aesthetic standard.

The greatest result that meets these criteria is artificial restoration of organs using implants.

One of the most competitive products is the products of the Simpl Swiss trademark.

About the manufacturer

Simpl Swiss dental implants were developed by the Swiss company formed in 1996. After the production of the first such implants, they were tested in Italy, which confirmed the high ability of these structures for osseointegration.

Today, this brand is recognized all over the world. The company strives to develop and improve the field of implantology, as well as to improve the characteristics of human life and health in general.

Over the three decades of its existence, U-impl has taken a position among the largest suppliers of dental products. Most European clinics are constantly supplied with products produced by this company. Russian clinics have also been using these implants for quite some time.

Simpl Swiss implants are one of the most popular in the world. A large number of models allows you to make a choice both in favor of a budget option and in favor of premium designs. The quality of their manufacture and compliance with international standards allow us to have no doubt about the success of using these structures.

Thanks to the positive practical results of using these structures, the company attracts a large amount of investment, which makes it possible to constantly improve production.

Implants are not the only product produced

In addition to implants, U-impl produces the following products for prosthetics:

Gum formers are used to give the desired relief to the gums after installation of an artificial root.
Shaping rings, also used for gum shaping.
Transfers, installation keys, implant and abutment analogues, which are used to create a plaster model of a number of teeth.
Inter abutments for cemented prostheses.
Screw-retained abutments used for removable and conditionally removable dentures when more than two teeth are missing.
Screws for attaching the abutment to the implant.
Implantation kits, including surgical and orthopedic instruments needed to implant an artificial root.
Drills for choosing the direction of implant installation.
Mills for forming a bone bed.
Cement for fixing crowns.

How does turnkey installation work?

Initial consultation with a dentist . The doctor assesses the condition of the oral cavity using x-rays of the jawbone and sanitation. Additionally, the patient must undergo a blood test to identify possible contraindications.
Preparatory stage . If necessary, dental treatment, gum restoration, and treatment of concomitant diseases are carried out.
Direct implantation . The operation to install one implant takes no more than an hour. First, the patient is given anesthesia, after its effect begins, the gum is cut from above, and a bed for the artificial root is prepared in the bone. After installation, the implant is covered with a gum former or plug to create a smooth mucosal surface. The engraftment process lasts 2-6 months. When installing a one-piece structure, no incision is made in the gum - the implant is simply screwed into the bone structure, avoiding severe tissue damage.
Installation of the prosthesis . At first, temporary prostheses are installed, and then permanent ones.

In some cases, additional procedures may be performed. For example, those who have insufficient bone volume undergo bone augmentation.

The whole process lasts at least 2-4 months; in severe clinical situations, when treatment or bone augmentation is required, this can take up to 1.5 years. These terms are relevant for classical methods of implanting titanium roots. With express implantation, everything takes about a week.

Design features of Simpl Swiss

Simple Swiss implants have unique design features. These include:

The presence in the design of an alloy of medical titanium, which is a chemically inactive element. Thanks to this, the risks of an allergic reaction and tissue inflammation are minimized.
The screw part of the Simpl Swiss implant is represented by conical hexagons, which undergo special processing, which facilitates easy and at the same time reliable implantation.
The metal frame is very durable, so it can withstand high chewing loads.
The product is equipped with special grooves located along the apical zone. When implanted, they are filled with fragments of the natural bone structure, which enhances primary fixation.
There is a micro-thread on the neck of the product, which helps to maximize the preservation of the volume of bone fragments in the areas of the mucous membrane that surrounds the shell, minimizing the pressure force in this area. For this reason, the gums and the upper segment of bone tissue do not lose their aesthetics.
The platform has a smooth finish, which increases resistance and resistance to harmful bacteria.
The abutment and implant are connected with a special fastener, which eliminates microchips and cracks, and also prevents food debris from penetrating inside and causing inflammation.
The product has a conical shape, so it can be used even on soft bone tissue, providing high primary stability.
The platform area is equipped with an edge ledge, which contributes to a very strong fit of the product.
A rough surface due to abrasive processing and acid etching that easily adheres to bone tissue.
Abutments in most cases have a gold finish and a low connection profile, which enhances the natural appearance after the crown is placed.

Implantation techniques

Implantation with delayed loading . The classic method involves implanting a titanium rod into the jawbone. Engraftment takes 3-5 months, then prosthetics are performed.
Basal implantation with immediate (instant) load . Unlike implantation with delayed loading, implantation can be performed when there is insufficient bone tissue. For this, non-separable structures are used that involve all parts of the jaw bone and can be implanted at an angle without interacting with atrophied areas. Implants are loaded 2-7 days after installation. With the help of dentures, the structure is connected and stabilized, the nutrition of the jaw bone is activated, which helps to accelerate healing.
Implantation after tooth extraction (express method). It is performed simultaneously - the titanium root is inserted into the hole formed after tooth extraction. Implantation can be carried out with either immediate or delayed loading, depending on the indications.
Mini-implantation. Small, thin dental structures are used that serve as additional fixation for removable orthopedic systems.
Combined implantation . Several methods are used simultaneously, taking into account the number of lost teeth, the state of the bone structure of the jaw, the requirements for functionality and aesthetics of structures.

Advantages

Simpl Swiss products have the following advantages:

The range includes a large number of different implants, abutments, formers and other instruments, which makes it possible to select the most suitable elements for each case.
Possibility of using both classical two-stage and single-stage implantation. In the second case, engraftment occurs also qualitatively.
Speed of engraftment. Thanks to the porous relief, the product is literally attracted by particles of bone mass, so osteointegration occurs quickly.
Lack of allergies and toxicity due to the biocompatibility of the material.
Ability to withstand high loads.
High aesthetic performance.
High quality packaging. Each product is contained in a sterile container. It is opened immediately before installation, which eliminates the appearance of any bacteria on the product.
Availability of individual code on each design. This eliminates the possibility of substitution.
Manufacturer's warranty for the lifetime of the product.

On a note! Some specialists offer implants of this brand for “all-on-4” implantation using the all-on-4 protocol. However, we hasten to warn you: for this technology, only original implants should be used (this technique was developed by Nobel). This is specifically for immediate loading, that is, if the prosthesis is placed immediately.

Permanent or temporary prosthetics

After the implant has engrafted into the bone structure (if the express method was chosen, then immediately after installing the rod), you can begin to select a prosthesis.

It can be temporary or permanent:

Removable butterfly designs. Inexpensive, they are used to close a defect as temporary prostheses using the classical implantation method until the titanium root takes root in the bone.
Single temporary crowns . Used to restore one tooth. Made from plastic and metal-plastic. They can be installed for a period from several days to several years. Typically, such structures are made shorter than natural teeth to reduce the resulting load.
Single permanent crowns . They are made of metal ceramics (the base consists of metal, the top layer is ceramic), or zirconium dioxide. The service life is 15-20 years.
Permanent bridges. They consist of several crowns and are designed to restore several teeth in a row; a bridge can also replace an entire row of teeth.
Dentures with artificial gums . The design includes crowns made of different materials, for example, for express implantation methods, metal-plastic is used, since it is lightweight and does not harm the implants. Artificial mucosa is used to camouflage natural gums and achieve maximum aesthetics.

Contraindications

Direct contraindications to the use of Simpl Swiss implants include:

any stage of diabetes;
the presence of malignant tumors;
undergoing chemotherapy treatment, after which the immune system has weakened;
AIDS, HIV;
active tuberculosis;
presence of mental disorders;
heart failure;
problems with blood clotting (both hereditary and acquired);
presence of chewing hypertonicity;
metabolic dysfunction that can inhibit engraftment;
bite defects;
the mucous membrane at the implantation site has a small volume;
intolerance to painkillers.

Relative contraindications:

lack of thorough oral hygiene care;
the presence of diagnoses that can weaken the body;
diseases of teeth and gums (periodontal disease and others);
bruxism.

After eliminating relative contraindications, implantation can be performed.

Varieties

produces the following models of artificial roots Simpl Swiss:

Inter are universal designs with high stability of the abutment, which can be used both for one-stage implantation and for two-stage implantation using bone grafting.
Maxi - excellent for use in the retromolar area with severe bone atrophy and on the lower jaw at the sixth and seventh teeth. These are solid, short implants with aggressive threading.
Mono Mini - used for one-stage implantation, as well as when there is no place required for the classical model to install the implant. Such products are highly durable, despite their reduced size. The carving on them can be presented in different variations.

Rating of Swiss implants Simple Swiss among other systems

Simple Swiss implant systems compete well with analogues from other companies. Patients are often interested in the developments of such popular companies as Osstem and Prodigy. You can understand which is better by comparing the characteristics of implants :

Osstem. They have been produced since 1992 by a South Korean company, which was the first to enter the world market in its country. They have the following advantages: Company representatives regularly conduct master classes on implantation and announce the recruitment of patients for free implantation of the structure.
Long service life.
The outer surface of the system is a combination of a crater and a micro-deepening. This accelerates osseointegration by 20% and allows the structure to be loaded within 6 weeks after surgery.
The surface of the structure is sandblasted with aluminum oxide.
There are models with increased stability; they can be implanted into severely weakened jawbone.
The surface of the structure is rough, which improves and speeds up engraftment.
Possibility of implantation using one- and two-stage methods.

Prodigy . Produced by the American company BioHorizons. Their advantages: Made from high-strength titanium alloy.
They have a rough surface, which is treated with calcium phosphate with quartz particles. This coating is completely biocompatible with jaw tissue.
The abutment is coated with titanium nitrate, which is practically the same as the color of natural teeth.
The design has a square thread, which increases the load area, which helps to distribute the weight of the implant evenly. This allows the system to be installed with a small amount of bone structure.
The implant has a hexagonal connection, which virtually eliminates the risk of losing the artificial root.
The thread has a beveled wedge type, minimizes the distance from the implant to the abutment, and ensures a strong connection.
Possibility of installation with instant load.

The Simpl Swiss implant system is competitive and is not inferior to other manufacturers either in quality or in other parameters.

Service life and warranty

As noted earlier, it provides a lifetime warranty on its products. More specifically, we can note the period of 70 years during which Simpl Swiss will serve the patient.

But this is only possible if the structure is installed properly by a specialist and all recommendations for its use and care are followed by the patient.

Note: If the manufacturer’s warranty is given for life, the doctor installing these implants only gives a two-year warranty on his work.

Video review of the restoration of all teeth in 3 days using one-stage implantation

Possible side effects and complications

side effects after surgery :

Hematoma and local edema.
Numbness of the tongue, lips, gums, cheeks.
Reduced chewing load due to the inability to fully open the mouth.

After installing Simpl Swiss implants, the following complications may develop :

Bleeding after surgery.
Necrosis due to poor cooling of instruments.
Infection in the postoperative wound.
Iatrogenic damage.
Seams coming apart.
Implant failure due to insufficient osseointegration.
Periodontal problems due to insufficient width of attached gums.
Broken fixing screw, jamming of the implant driver caused by excessive force when tightening the structure.
Aspiration or ingestion of small dental components.
Damage to the implant due to excessive load (quite rare).

Price

The price for implantation using Simpl Swiss will differ depending on the condition of the tooth (its complete long-term absence, pain or destruction).

The price is also affected by the status of the clinic, the region of residence of the patient, the need for preparatory work and the anesthetics used.

On average, you can give a price of approximately 40 thousand rubles. But the line of models of the products in question is quite wide and is aimed at customers with average incomes.

Kinds

The range of implants is based on three main types:

Inter – suitable for both standard two-stage implantation procedures, when bone tissue grafting is required, and for one-stage implantation. The main advantage is the versatility of the design and its wide range of applications.
Maxi – is used primarily for replacing chewing teeth against the background of severe fragmented atrophy of the mandibular bone tissue. The advantage is increased strength of the product and enhanced fastening of the model;
Mono Mini – the scope is somewhat limited. The system is adapted only for a one-step procedure. An undeniable advantage is the possibility of its implantation in the presence of limited bone spatial mass.

Check out the rating of the best dental implants and their manufacturers.

This material is dedicated to Biotech implants.

Here https://www.vash-dentist.ru/implantatsiya/proizvoditeli/semados-obzor-produktsii.html reviews about Semados implants are offered.

Reviews

Irina, 39 years old

When I found out that the implants that the dentist recommended and praised were made in Switzerland, I agreed to have them installed. I chose Simple Swiss because I trust Swiss quality, and also because in our small town these implants are the best of what clinics can offer. Of course, the treatment was a bit expensive, but I am more than pleased with the result.

Anna, 45 years old

I had Simpl Swiss installed on the seventh tooth of the lower jaw. I didn’t feel any pain during implantation. It hurt a little after the anesthesia wore off. Engraftment went without problems. I am glad that I filled the gap in my dentition with such a high-quality design.

Katerina, 36 years old

I have two ceramic crowns on my front teeth, and their roots are Simpl Swiss implants. I was very worried after losing two front teeth as a result of a sports injury. Fortunately, I was advised by a good doctor, who considered that in my case these designs would be best suited. Engraftment took place without complications. The smile is quite attractive. True, I can’t bite apples now, I have to cut them into slices, but this is not critical.