NeoBiotech is a modern implantation system that has taken a strong position in the modern Russian market. They are used for both permanent and removable dentures.
Implants are perfect for both instant installation and two-stage installation. The manufacturer has developed a unique BioSeal design. This design reduces the rate of bone atrophy and resorption.
Only high-quality materials are used in production. The SLActive coating guarantees maximum adherence of the prosthesis to the flesh, much better than all its competitors.
Advantages of NeoBiotech
NeoBiotech implants have many advantages compared to other companies:
- ease of installation and engraftment;
- the minimum amount of time required for fixation;
- absence of an allergic reaction, as well as acceptance of the prosthesis by the body;
- perfect for use on any type of bone tissue;
- long service life compared to analogues;
- does not require threading for installation, in 95% of cases it can be done independently;
- it is possible to install after the primary drilling procedure;
- in the case of sinus lifting, it has reliable fixation;
- It can be used for both removable and fixed prosthetics.
Types and characteristics of systems
In the period from 2007 to 2022, Neobiotech developed and launched the following systems on the dental market: CMI, IS II, S-Mini, IT II, IS-III, EB-II.
IS-II system (IS-II and IS-II Active models)
The design of the IS-II and IS-II Active implants is almost similar. The difference lies only in surface treatment technology , which we will discuss below.
The macrosurface of the IS-II system has the following features:
- The conical shape of the implant body creates the necessary compression between the implant and the bone.
- Single-turn deep thread with a pitch of 0.8 mm and a triangular sharp profile - creates high primary stability.
- Aggressive apex – creates a tight fit into the bone and primary stability.
- A thin, recessed neck with a 0.5 mm thread prevents bone resorption and ensures the tightest possible fit of soft tissue.
The connection between the implant and the abutment is conical. The parts are mated along conical surfaces (11°), and tightened with a central screw.
This type of connection ensures the absence of micromovements, which is considered an important condition for ensuring high-quality implantation.
A detailed review of Tekka implants from French developers.
Come here if you are interested in the features of Biomal implants.
At this address https://www.vash-dentist.ru/implantatsiya/proizvoditeli/implasa-hochst.html we will consider the Implasa Hochst implant system.
Dimensions System IS-II and IS-II Active
In addition to the standard design, the IS-II system includes S-Wide models, characterized by a larger diameter.
Dimensions of standard design models: diameters – 3.5, 4.0, 4.5, 5.0 mm, lengths – 7.3, 8.5, 10.0, 11.5, 13.0, 15.0 mm.
Dimensions of S-Wide design models: diameters – 5.5, 6.0, 7.0 mm, lengths – from 7.3 to 13.0 mm.
Note. Implants with a diameter greater than 4.5 mm are recommended to be installed in the lateral segments of the dentition.
Microsurface
The microsurface provides secondary stability, that is, the quality of integration (connection strength) of the implant with the bone. For IS-II Active models it is made using SLA technology followed by hydroxyapatite coating, for IS-II models - using RBM.
This is the only difference between the IS-II Active and IS-II models.
Note
Numerous studies have found that newly formed bone tissue “adheses” to the rough surface of titanium rods much better than to the smooth surface. Therefore, all modern implants have a rough surface.
There are two most advanced surface treatment technologies: SLA and RBM. The first (S – Sand-blasted – sandblasting, L – Large grit – large grain, A – Acid-etched – acid etching) means sandblasting with a large abrasive and acid etching.
With RBM (R - resorbable, B - jet, M - medium), Beta-Tricalcium phosphate granules are used as an abrasive , which completely dissolve during subsequent etching in low-concentrated acid.
This makes the surface clean with deep pores, which has a positive effect on the adhesion of the implant to the bone and secondary stability.
RBM technology is considered more progressive than SLA , although the latter is quite effective and of high quality.
How is the implant installed?
For high-quality fixation of dental structures, a technology called “Coronal microthread” is used, which makes the process of introducing an artificial root into the bone easy and fast. Also during installation, MagicThread technology is used, which not only guarantees the reliability of the entire structure, but also allows you to install the prosthesis without a waiting period for engraftment.
The system, which has no analogues, developed by Korean specialists from the NeoBiotech company allows for prosthetics even in non-standard situations, for example, with mixed bone types. This feature distinguishes this system from its, even larger, competitors.
A little about the manufacturer
Neobiotech is a South Korean company specializing in products for implantology, digital dentistry and dental restoration, founded in 2000.
When developing and producing dental implants, the company’s specialists paid special attention to primary stability and rapid, high-quality integration with the bone.
In this regard, Neobiotech specialists consider the most important parameters of implantation systems to be the biodensity at the site of implant-bone contact, the configuration of the apex and the type of surface treatment of the titanium rod.
Neobiotech management professes the principle of placing the design and production of implants in one place for effective interaction between developers and manufacturers. Neobiotech's office and production buildings are located in Seoul.
The company employs more than a hundred highly qualified employees who produce more than 4 million prosthetic components, implant systems and instruments per year.
Neobiotech products are supplied to more than 60 countries. All of it is certified according to ISO 9001 and EN/ISO 13485 standards.
Warranties and service life
An analysis of the results of using Neobiotech implants shows that their survival rate reaches 98%.
It should be understood that the service life of implant systems depends not only on the quality of the implants, but also on the professionalism of implant surgeons, the quality of care for prostheses based on them, the general health of the patient, and the status of his immune system.
Therefore, implant manufacturers usually prefer not to provide specific guarantees regarding the service life of their products.
Judging by the fact that the guaranteed service life of Neobiotech implants is nowhere to be found on the Internet, we can conclude that the South Korean manufacturer is one of them.
This is completely understandable and forgivable. Taking into account the above figure of 98%, we can assume that such a percentage of successful engraftment of Neobiotech implants guarantees their patients a lifetime of use of prostheses based on them.
The video provides an overview of the Neobiotech implant system.
Reviews
South Korean implants are becoming increasingly in demand among Russian dentists and patients.
First of all, thanks to the excellent quality-price ratio. If you are one of Neobiotech's clients, please share the results of using their implants.
How comfortable were the prostheses based on them, how long did they serve you, did you encounter any problems? You can leave your comment at the end of the page.
If you find an error, please select a piece of text and press Ctrl+Enter.
Tags implants implant manufacturers
Did you like the article? stay tuned
Previous article
What is APRF fibrin clot and what is its purpose in dentistry?
Next article
Etiology of osteitis of the jaw and methods for its elimination
Indications and contraindications
Implants can be installed even if one tooth is missing, if the patient wishes. However, indications for dental implantation are usually defined as cases when it is impossible to use fixed prostheses, in particular bridges, to replace defects.
Such cases include the following:
- Completely edentulous.
- Partial adentia, in which the length of the defect is more than 4 teeth in the frontal segment, and more than 3 in the lateral segment. And also unlimited (end) defects, in which there are no teeth on at least one side (can be used as supporting ones for MVP).
- Allergy to bridge components.
IS II implants (except for S-Wide models) are universal and can be used in all standard cases for dental implantation. But there are certain brands that are designed for installation only in certain places in the dentition.
Thus, S-Mini systems with a diameter of 2, 2.5, 3, 3.5 mm, made at the same time as an abutment, are intended for installation in the frontal segment when there is a lack of space, or as temporary supports until the permanent ones are healed.
Designs with a wide platform (IS-III active S-Wide, IS-II active S-Wide, IS-II S-Wide, IS-III active Short, EB S-Wide) with dimensions: diameter 5.5, 6.0, 7.0 mm and lengths from 7.3 to 13.0 mm are designed for installation in side segments.
Absolute contraindications to the installation of Neobiotek structures are cases in which dental implantation is generally contraindicated - the patient has serious systemic diseases, primarily associated with impaired bone regeneration and endocrine pathologies.
Relative contraindications are poor hygienic condition of the oral cavity (removed by professional cleaning), dental and periodontal diseases (sanitation of the oral cavity is carried out), lack of bone volume at the site of implant installation (augmentation is performed first).
How do BoneTrust dental implants differ from systems from other brands?
This publication contains all the most interesting things about Russian-made dental implants.
Here https://www.vash-dentist.ru/implantatsiya/proizvoditeli/zubov-izrailskie-razrabotchiki.html you will find real reviews about Israeli dental implants.
All the pros and cons
Despite their relatively late appearance on the market, Neobiotek implants meet all the requirements for modern implantation systems and have high technological and operational characteristics.
They are distinguished by the following features, which may well be considered as advantages:
- Good primary and secondary stability , allowing the use of various implantation protocols: one-stage, two-stage, immediate. The advantage is provided by aggressive screw cutting, conical apex shape, and advanced surface treatment technology.
- A wide range of sizes (diameter from 2 (S-Mini) to 7 mm (S-Wide), lengths from 7.3 to 15 mm), allowing you to choose the model of the required size for any clinical situation.
- High quality of integration of implants with bone thanks to the use of today's best surface treatment technologies SLA and MBR.
- Dense, without micro-movements, connection of implants with abutments using a cone type.
- The availability of various types of abutments (straight, angled, solid (S-Mini)) allows you to find the optimal solution for any clinical case.
- Convenient, high-quality tools for installing structures and assembling superstructures.
- Affordable price (from 15,000 rubles for installation of one implant).
There are practically no disadvantages of Neobiotech systems that would make sense to talk about. In any case, it is not possible to find information about them on the Internet.
This, in general, is quite expected, given that Neobiotech uses the most modern technologies to date in their production.
