Alpha-Bio implants combine two remarkable properties - availability and quality.
Dentists prefer these systems both for their high survival rate - more than 98%, and for the breadth of choice, which allows them to cope with any orthopedic problem.
The company was founded in Israel in 1988, and still has a good position in the local dental market.
In Russia, the brand represents dental implants in the mid-price category, and in almost every dental clinic in Russia, implantologists actively use these systems.
Peculiarities
Alpha-Bio implants have the following important characteristics that affect the degree of their engraftment and quality.
Material
Ti-6AI-4V alloy is absolutely biocompatible with the human body and is durable, and orthopedic products made from it are not rejected and take root better.
Structure
In their advertising, company representatives focus on the rough microporous surface of the system - Nano Tec.
Its peculiarity is that, unlike polished implants with a perfectly smooth surface, osseointegration when using this design is of higher quality.
Bone cells actively interact and penetrate micropores, and as a result, the growing tissue forms a single whole with the implant.
To achieve such a structure of a titanium microprosthesis, different techniques are used. Sandblasting has become the most common.
This technology uses abrasive particles of a certain grain size. The workpiece is then etched with acid to make the pores even deeper.
This roughness helps increase the bonding area between the titanium surface and the bone. The implant heals faster and becomes stable.
Form
Another important technological detail of the system is the cone-shaped design, although there are also cylindrical models.
The anatomical model of the tooth is repeated as accurately as possible, due to which the chewing load between the prosthesis and the bone is distributed evenly.
Special thread
The Alpha-Bio catalog of implants includes a variety of models with special threads, which are easily installed in the jaw without damaging the bone tissue.
Compound
The implant has a hexagonal recess inside, into which the abutment with a hexagonal cone fits tightly, without gaps or cracks.
In addition, this connection is universal - abutments of the MIS, Alpha Gates, ADIN systems are attached well to it.
Package
Sterility is a prerequisite for the success of the operation. And the producers executed it at the highest level.
The product is in a transparent double capsule, on which the serial number of the prosthesis is placed. The titanium screw can be easily removed using the installation tools.
Dentists are well acquainted with Alfa-Bio implants, thanks to open seminars, lectures, and training courses that take place throughout Russia.
Watch the video for product packaging.
Surface characteristics of Alpha-Bio implants –
There are 2 main characteristics of implants, which primarily affect the quality and degree of osseointegration, i.e. on the quality of fusion of the implant with the bone. First of all, these are the surface features of the dental implant, and to a lesser extent, its shape (cylindrical or conical), and the thread features.
1) Material of manufacture –
The manufacturer uses titanium alloy Ti-6Al-4V (titanium - 6 aluminum - 4 vanadium) class 23. This is the most popular titanium alloy among manufacturers of economy class implants. On the one hand, aluminum and vanadium impurities make it possible to slightly increase the strength of titanium, but on the other hand, they somewhat worsen the speed and degree of osseointegration of implants.
It must be said that most of the top manufacturers of implants, which are rightfully market leaders in Europe and the USA, usually use a more expensive grade of titanium, for example, ultra-pure commercial grade 4 titanium (G4Ti). This grade of titanium, in turn, no longer contains impurities of vanadium and aluminum, and implants are made from it by such well-known companies as -
- Staumann (Switzerland),
- NobelBiocare (Switzerland),
- AstraTech (Sweden),
- as well as Korean ]Osstem[/anchor].
2) Surface characteristics –
The surface of this company’s implants is called “NanoTec”. According to the international classification, it is an “SLA” type surface, i.e. The implants are first sandblasted (in this case with aluminum oxide particles) and then acid etched. SLA is a quite good type of surface, but still it is the last century - in comparison with the more modern ultra-hydrophilic surfaces of implants from Strauman, Nobel and other companies.
NanoTec surface under a microscope –
This surface lacks the latest innovations and developments in the field of implantology - a negatively charged hydrophilic surface, impregnation with calcium phosphate, phosphorus or fluorine ions, and the surface nanotexturing technique is not used. All these technologies are used in more expensive implants, and they make it possible to increase the quality and speed of osseointegration, achieve good aesthetics of the gums around the implant neck, significantly speed up the start of the prosthetic stage, and also reduce the risk of implant rejection in smokers, patients with diabetes and osteoporosis.
In addition, the same “SLA” surface from different manufacturers is not at all the same. The technological features of the sandblasting process and the process of etching the surface of the implant with acid play an important role. For example, there are more expensive technologies, and there are cheaper ones. For example, sandblasting with titanium oxide particles (used by Strauman) is a fairly expensive technology and, of course, it significantly increases the cost of implants, which manufacturers of budget products cannot do.
The Straumann company (Switzerland) has implants not only with the ultra-hydrophilic “SLActive” surface, but also has more budget-friendly implant options - with the usual non-hydrophilic “SLA” surface. But you must understand that the “SLA” surface of Straumann and Alpha-Bio are 2 completely different SLA surfaces when it comes to technology and quality of osseointegration. This is exactly the option when price really matters.
Advantages
The reasons for the popularity of Alfa-Bio systems among dentists and patients are their obvious advantages:
- they are reliable and safe - the manufacturer carries out careful quality control of each product;
- installed in any part of the dentition;
- with their help you can achieve high aesthetics;
- products are affordable;
- serve for a long time and have a diverse range to resolve even complex clinical situations;
- the manufacturer offers a variety of prosthetic elements and surgical instruments, which greatly facilitates the doctor’s work;
- implantation with complete restoration of chewing and aesthetic function can be performed in just one visit;
- surgeons and orthopedists note the ease of installation of the system and availability in terms of purchase.
Thanks to the wide representation in our country, and accordingly the awareness of specialists, if a difficult situation arises, the doctor can easily find more informed colleagues and consult with them.
In addition, products from this brand are less demanding on the volume of bone tissue and its quality. In most cases, osteoplastic and expensive operations such as sinus lift can be avoided.
Prosthesis maintenance on multi-units
As mentioned above, the advantage of implant prosthetics with Multi-Unit abutments is the ability to remove the prosthetic structure and carry out preventive maintenance. Quite often after surgery, the doctor draws up a schedule of visits for this, the standard is once a year. This includes:
- Using a special key and holder, the prosthesis is removed;
- the structure is thoroughly cleaned;
- the position of the implants is checked;
- the prosthesis is installed back on the screw fastenings.
You won’t be able to carry out such a service at home yourself.
Flaws
In fact, these systems have practically no disadvantages, unless we count as such certain contraindications related to the patient’s health condition.
In addition, doctors note that the company is increasingly introducing more high-tech solutions and new products to the market, although their competitors in the same price segment are more active in this matter.
Read the fairest reviews about Mis implants from the Israeli manufacturer. Let's discuss here the cost of Astra Tech implants and the price of their installation.
At this address https://dentist-pro.ru/implantaciya/proizvoditeli/nobel-biocare/obzor-produkcii.html we will talk about the installation of Nobel implants.
Alternative Methods
The absence of one or more adjacent teeth can be compensated for by:
- removable dentures;
- bridges provided that the supporting teeth are healthy;
- prosthetics on mini-implants.
Contraindications
These systems are not suitable for every patient. Contraindications for installation are as follows:
- allergy to construction material;
- blood diseases;
- diseases of the endocrine, cardiovascular and nervous systems;
- tuberculosis;
- AIDS;
- bruxism;
- chronic forms of drug addiction and alcoholism.
Implants are not installed in patients with mental disorders and cancer.
In the video, watch how the procedure for installing the Alpha Bio implant is carried out.
Taking an impression of multi-component abutments
After making impressions of the implants with the gingival margin formed, individualization of standard transfers for the open tray follows. Otherwise, an accurate impression of the soft tissue in the implantation area will not be obtained.
Algorithm for taking an impression of a MultiUnit structure:
- Transfers are established and recorded on superstructures.
- Impression fluid is applied around the transfer with a syringe.
- Impression fluid is applied to a special impression tray.
- A spoon is inserted into the oral cavity.
- After the material has hardened, the spoon is removed from the mouth and the screws securing the transfers are removed.
- The resulting impression is sent to the laboratory, where abutment analogs are combined with transfers.
- The screw is screwed in.
- A model of the mouth is cast.
Catalog overview
On the official Russian-language website of Alfa-Bio you can find complete descriptions of each type of implant, its advantages, design features, and special indications for installation. The official price list of the company is also presented there.
Implants with internal hexagon
NEO
The spiral and conical implant has an original shape of the apical part, due to which the contact with the bone increases. Advantages:
- easy to install;
- primary stability at the highest level;
- excellent indicators of preservation of bone tissue;
- good results in difficult clinical situations.
You can work with tissue of different densities and perform highly aesthetic restorations using CAD/CAM technologies.
SPI
The company's flagship. Can be used in soft bone tissue. It has high rates of bone tissue compaction around the implant and shows good primary stability. Often used with a one-stage implantation method.
Narrow space is not an obstacle to installing this type of prosthesis. SPI is enough for 2 mm of bone around the implant.
It has such important qualities as self-tapping and self-screwing into the implant bed.
ICE
It can be implanted equally successfully into soft and hard bone. It is used in one-stage and two-stage prosthetics.
Can be used simultaneously with sinus lift. Has the following design features:
- root-shaped implant body
- in the coronal part there is a reverse cone;
- has microthreads with different starts.
With its help, you can achieve ideal aesthetics and good results in a variety of clinical situations.
DFI
Experts include ease of stabilization and complete control during the installation process as obvious advantages.
In addition, the prosthesis has a significant external area and long-term stability prospects.
Distinctive design qualities:
- small cone;
- multi-format design and double thread;
- cutting grooves on the top.
Dense bones are a common site of installation for this species. Heals in 3-6 months.
ATID
Installed in very dense bone tissues with poor vascularization. Features low pressure on the bone.
Healing occurs over 3 or 6 months.
Manufacturer-guaranteed service life of South Korean Osstem implants, and how to extend it. In this publication we suggest finding out the cost of Osstem implants.
Follow the link https://dentist-pro.ru/implantaciya/problemy-i-oslozhneniya/vred-i-polza-protivopokazaniya-k-ix-ustanovke-otzyvy.html if you are interested in contraindications and harm of dental implants - reviews from dentists and patients.
Conical hex implants
NEO
Spiral implants of a new generation are used for prosthetics of small orthopedic and surgical spaces.
It is possible to manufacture crowns and abutments using CAD/CAM technology. Has high aesthetic characteristics.
NICE
Alveolar ridges and confined spaces can be successfully implanted only with structures of this type.
Differ:
- thin conical body;
- sharp deep thread on the apical part;
- optimal conical hexagonal connection.
Thin implants
ARRP
One-piece design with permanent abutment. With its help, lower and upper lateral incisors with narrow alveolar ridges are prosthetized.
ARRC
The system is similar to the previous type, but it does not have a permanent abutment.
Self-tapping screw prosthesis that can be used for any type of bone. Can interchange several types of suprastructures.
ARR and ARB
These structures are temporary and have different abutment shapes: straight - ARR and spherical - ARB. The length of the implant is 10-15 mm.
Products are used to support temporary removable dentures installed as an addition to permanent ones.
Prosthetic elements
Alpha-Bio prosthetic elements have a single orthopedic platform that allows the use of implants of different diameters with different connections.
The official catalog presents abutments, gum formers and various components for dental laboratories.
Gum formers are developed in three varieties:
- standard – installed in all implants and have a length of 2-7 mm;
- thin - for structures with an internal hexagon, with a length of 3 and 5 mm;
- wide – for prostheses with a diameter of 5-6 mm
Abutments are presented in the following types:
- standard;
- zirconium;
- plastic;
- for beam and rifle mounting;
- temporary.
Thus, dental technicians, orthopedists and surgeons receive a wide and varied toolkit for numerous types of orthopedic rehabilitation.
How does the installation work?
Multi-unit adapters are installed after the healing abutments are removed. Installation is preceded by determining the required height of the connecting element.
Installation protocol:
- Select a multi-unit for the appropriate platform.
- Position and install into the implant using the holder.
- Tighten the screw connection.
- Remove the holder by rotating counterclockwise.
- Final tightening of the screw with a screwdriver and a wrench with a dynamic force of 30 N/cm.
MultiUnit suprastructures are usually supplied with a torque wrench, holder and screwdriver.
Warranty and service life
According to observations that were carried out for 5 years or more, a high percentage of survival of Alpha-Bio implants was noted - more than 96% in the upper jaw and 98% in the lower jaw.
The manufacturer provides a lifetime warranty on all its products. He also promises to replace the product if a defect is discovered, it is rejected and fractured.
But no guarantees will ensure the long service life of these systems if, firstly, they are installed by a non-professional specialist and, secondly, the patient does not follow the recommendations for their care.
Caring for products should be even more thorough than caring for your natural bone organs in the oral cavity.
It is especially necessary to monitor the condition of the gums, because their inflammation in advanced cases can lead to implant rejection.
Regular oral hygiene procedures using irrigators, floss and dental floss will prolong the service.
What do patients say?
These designs are supplied to 40 countries around the world, including Russia, and occupy more than a third of the total implantation market. You can share your feedback about these implants by leaving a comment on the article.
If you find an error, please select a piece of text and press Ctrl+Enter.
Tags
Did you like the article? stay tuned
Previous article
Inlay for a tooth under a crown: description and photo
Next article
Toothbrushes for braces: need for use and description of types
Prices
| Implants with internal hexagon | |
| Model | Price in rubles |
| NEO | 6 902 |
| SPI | 5 177 |
| ICE | 4 900 |
| DFI | 4600 |
| ATID | 3 800 |
| Conical hex implants | |
| NEO | 6 902 |
| NICE | 5 500 |
| Thin implants | |
| ARRC | 4 602 |
| ARRP | 4 602 |
| ARR | 2 400 |
| ARB | 2 400 |
Where to go for installation of implants on Multi Unit
For multi-unit dental implantation in 2022, you can contact many dental clinics in the capital, some are listed in the table below.
| Dentistry | Website | Address |
| ROOT Center | https://dentalroott.ru |
|
| Implant Ru | https://www.implant.ru |
|
| City-Dent | https://city-dent.rf |
|
| Unident | https://www.6750000.ru |
|
| Center Family Dentistry | https://family-dental.ru |
|
Other jobs
Meet Alpha Bio dental implants
Implantation is indicated in cases of complete absence, incorrect location, or various abnormalities in tooth growth. It is Alpha Bio that is the ideal solution to the problem. High compatibility with almost all types of bone tissue allows implants to be maximally adapted to the characteristics of a particular patient.
The positive installation result is about 99%, which is a good indicator among the varieties of products from other manufacturers. Alpha Bio dental implantation makes it possible to provide the patient with a Hollywood smile even in the most difficult cases, in the presence of thin jaw bone, atrophied alveolar processes and other complications.
