The purpose and subtleties of obtaining high-quality dental impressions in dentistry

9386

An impression or cast of teeth is necessary in the process of prosthetics of any elements of the dentition.

Also, orthodontics cannot do without the use of impressions when creating alignment or bite-correcting systems.

It is used to produce the most precise orthopedic and orthodontic devices.

general description

An impression is an impression of one or all elements of the dentition, according to which models of future designs for prosthetics are cast in laboratories.

The scope of application of impressions is orthopedic dentistry. When taking an impression, the specialist uses impression trays, as well as various types of materials - plaster, silicone, etc. Impressions are made before making corrective devices.

Casts are also used for aesthetic purposes, such as bleaching units. Silicone mouth guards are made based on tooth imprints, which are used to perform remineralization restoration of elements.

Using impressions, you can make a diagnostic model and determine the type of dental disease.

What prostheses are made from impressions?

The basis of orthopedic structures are dental impressions. This material reflects the dentition and soft tissues of the oral cavity, on the basis of which dentures are made.

Impressions of teeth for prosthetics

are removed for the manufacture of the following structures:

• braces and trainers used in the treatment of malocclusion;
• dental crowns;
• bridges;
• removable and fixed prostheses;
• individual abutments.

Types of impressions

Impressions are divided into anatomical and functional. In the first case, the construction is manufactured without taking into account the characteristics of the tissues that are located on the border of removable dentures.

In the process of creating functional structures, medical instruments are used, selected in accordance with the individual characteristics of the patient.

Due to this, the mobility of the soft tissue folds located on the border of the implantation bed is reflected on the impression. A functional impression is indicated for patients who have lost all or part of their teeth.

Functional type products are classified into types:

1. Compression. Used to take an impression of the lower jaw.
   The products reflect the relief of the base of the prosthesis and allow you to redistribute the load during chewing over a larger area of ​​its base. Due to this property, premature atrophy of bone structures is prevented. To make a compression print, materials with high viscosity values ​​are used.
2. Unloading. The base of the prosthesis made from the unloading cast will have the shape of uncompressed mucous membranes.
   This type of device is recommended for people whose professional activities involve speaking. The load during chewing will be distributed unevenly due to the mismatch between the relief of the bone tissue and the base of the prosthesis.
3. Combined. Necessary for creating devices that compress the pliable and unload the sedentary areas of the mucous membranes of the mouth located in the prosthesis area.
   Thanks to differentiated impressions, implants are created that provide an even load during chewing or speaking.

How much does dental prosthetics cost?

Taking impressions is a mandatory procedure before prosthetics, without which it is impossible to create orthopedic structures for installation. As a rule, this procedure is included in the total cost of prosthetics.

How much does it cost to get dentures?

, depends on various nuances: the type of orthopedic structure chosen for installation, the material for the impression, the complexity of the case and the individual tariffs of the dental center.

We have established affordable prices for prosthetics and dental implants. Medical and surgical procedures are performed by qualified dentists with extensive professional experience, using innovative techniques and high-quality materials from the world's best manufacturers.

How much does dental prosthetics cost:

• removable
  dentures – from RUB 17,400;
• dental crowns – from RUB 3,300;
• veneers – from 12,000 rubles;
• tabs – from 6500 rub.

More detailed information about prices and services of the center is available on the official website. All patients who leave their reviews on our website are guaranteed to receive a 3% discount on all types of dental services (this is additional and is added to the main discounts available to the client).

Material groups

All materials used to make impressions are hypoallergenic.

The domestic industry offers 3 types of materials for creating impressions - hard, thermoplastic and elastic.

Solid

Gypsum is most often used to make the structure. It consists of a powder diluted with water and contains:

• calcium sulfate;
• borax;
• starch;
• hemihydrate

The hardening process of gypsum is easily controlled by introducing additional amounts of borax and calcium sulfate.

The material mixes easily, the main thing is not to trap air during the procedure. Otherwise, pores will form on the surface of the material.

The hardening time of the plaster impression is 2-3 minutes. The mixture is characterized by low viscosity and good spreading over the surface of mucous membranes.

Among the advantages of gypsum it should be noted:

• reproduction of the relief of soft tissues with high accuracy;
• ease of use;
• maintaining original dimensions;
• possibility of delayed production of a plaster model.

The disadvantages of the material include:

• increased rigidity;
• the impossibility of creating an imprint from those parts of the tooth that are located close to the surface of the gums (undercuts);
• Patients have a feeling of dry mouth after removal of the impression.

Among the hard materials used to create an impression, dentol should also be noted. The material is a mixture of guaiacol and zinc oxide eugenol.

Advantages of Dentol:

• low degree of shrinkage and deformation;
• the ability to create accurate impressions of the surface of teeth and soft tissues;
• possibility of long-term storage;
• harmlessness.

Is it always necessary to file teeth before installing braces?

Learn more here about how braces work.

At this address https://orto-info.ru/ortodonticheskoe-lechenie/podgotovitelnyiy-period/separatsiya-zubov.html we will tell you what teeth separation is.

Elastic

Elastic impressions are divided into 3 groups - silicone, alginate and thiokol. The basis of these materials is agar.

To ensure product strength, fillers are added to the impression mass. When heated, materials become soft, and when cooled, they become elastic.

Analginate products include novalgin and stomalgin. The design is characterized by a high degree of elasticity and a clear recreation of the contours of the prosthetic bed.

In dentistry, prostheses for jaws with partial absence of teeth are made from this material. This type of cast is characterized by a significant degree of shrinkage, so they are not suitable for long-term storage.

Sodium alginate, which is part of the material, allows you to easily separate the impression from the prepared model.

Silicone materials are made from liquid polymers mixed with a hardener. Silicone is used in the manufacture of:

• porcelain crowns;
• metal-ceramic and bulge prostheses.

Silicone impressions shrink on average 3 hours after production. Therefore, the creation of models occurs no later than this time.

Thiokol prints in dentistry are used for the same purposes as silicone prints. The advantages of these products include a low degree of shrinkage, and the disadvantages include the difficulty of obtaining the required shape.

Thermoplastic

Thermoplastic impressions are produced in the form of disks with a diameter of 100 mm. The material begins to melt at a temperature of 50-70 degrees.

Thermoplastic products include gutta-percha and wall. Among the negative properties of thermoplastic, the following should be highlighted:

• difficulty in making models;
• lack of “delay”.

There are 3 types of thermoplastic masses:

• No. 1 – used to take impressions of jaws that do not have teeth;
• No. 2 – used in orthopedics to take maxillofacial impressions;
• No. 3 – used for the production of pin teeth and splints.

Advantages of thermoplastic:

• separates well from models made from them;
• amenable to metallization;
• can be repeatedly introduced into the patient’s oral cavity;
• suitable for performing functional tests.

Modeling

Modeling materials include various types of wax - casting, base and for inlays. In dentistry, modeling impressions are used in the process of creating metal prostheses.

Inlay materials are used to create locking fastenings in combined type prostheses.

Casting wax is used in the production of thin dentures, and base wax is used for modeling temporary bridge models.

The advantage of the materials is a clear display of the contours of teeth and soft tissues. Lack of wax means a high risk of deformation.

More details about the materials and devices used are described in the video.

Caring for braces after installation

Caring for braces after installation is more difficult than caring for teeth without them. There are more hard-to-reach places in the mouth to clean, and plaque forms faster. It is necessary to responsibly follow all the doctor’s recommendations so that later, after straightening, you do not have to put fillings on all your teeth. You will need an orthodontic brush, brush, dental floss and irrigator.

How to care for braces after installation?

• Teeth with braces must be brushed 3–4 times a day, slowly and thoroughly, ideally for 10–15 minutes. It is recommended to use a special orthodontic brush: you can recognize it by the inscription Orthodontic or Ortho. You will also need a brush to help clean your teeth around the braces. Dental floss can handle even the smallest food debris. An irrigator - a device that can clean the most inaccessible places - completes the care.
• Sticky food is a no-no as it can get stuck under your braces. It is better to postpone sweets, especially toffees, until after treatment, as well as foods and drinks high in sugar and acids.
• Sapphire, ceramic and plastic braces require an expanded list of limited products. Drinks containing high amounts of dyes—tea, coffee, soda, and some juices—can affect the color of your orthodontic system.
• In the first days after installing braces, it is not recommended to eat solid food. As for small children, everything should be pureed and liquid. This even applies to fruits. Anything that needs to be chewed is excluded. You can use meat, but be careful not to get stuck in the fibers. It is better to choose tender varieties and cut into small pieces.

If it is not possible to brush your teeth after eating, you should at least rinse your mouth. Even if you care for your braces according to all the rules, periodically undergo professional cleaning and rinse your mouth with a fluoride solution.

Basic requirements for products

In dentistry, there are a number of requirements for impressions:

• products must accurately follow the contours of the soft tissues that will come into contact with the prostheses;
• when removed from the oral cavity, the print should not be deformed;
• during storage, the impression should not shrink significantly;
• materials used to create the product must be disinfected without loss of quality;
• The print must be freely separated from the model made from it.

Oral preparation

The specialist begins creating an impression immediately after selecting suitable material and medical instruments. Before making an imprint, the bony organs of the oral cavity are dissected.

After this, the mouth is thoroughly dried with cotton swabs or a dental gun. Then the doctor kneads the materials he has chosen.

With complete adhesion, which is often observed in older people, the bone structures of the jaw undergo some changes.

In places where elements are missing, growths - exostoses - can form. The impression is taken after surgical removal of all bone growths.

Indications for correcting defects using orthognathic surgery and patient reviews about the effectiveness of the radical method.

In this article we will find out whether it is possible to put braces on crowns.

Here https://orto-info.ru/sistemyi-vyiravnivaniya-zubov/breketyi/kak-mozhno-tselovatsya-otkrovenno-o-sokrovennom.html read whether braces interfere with kissing.

How to install braces inexpensively?

Of course, everyone wants to have beautiful, straight teeth. But in the pursuit of the perfect smile, not the least important question is where the installation of braces in Moscow is inexpensive. The compulsory medical insurance policy does not include bite correction and teeth straightening, which means you have to pay for them. Orphans, disabled children, and children with congenital jaw pathologies have the right to preferential treatment. Free installation of braces in the clinic is provided for patients injured due to medical errors.

You can use tricks and look for great deals at dental clinics. Often, braces are offered as a gift during orthodontic treatment. There are also gifts from trial batches of new products. Many clinics actively use savings systems. The bonuses accumulated over the year may well be enough to pay for braces. The most profitable offers are in the turnkey format.

It is immediately clear how much you will have to spend, and in the future - to avoid mark-ups.

However, be prepared for serious financial costs. Orthodontic treatment is not quick; it takes from 1 to 2.5 years to correct a bite. The most economical braces are metal, from 15,000 rubles. Ceramic models will cost more - from 35,000 rubles and sapphire - from 40,000 rubles. For invisible lingual braces you will have to pay significantly more than for vestibular models - from 100,000 rubles. All prices are for installing braces on one jaw.

.

Removal methods

The doctor selects the spoons with which the impression will be made, focusing on the shape of the patient’s jaws.

Orthopedists have a standard set of spoons in their arsenal, differing in size. Using fitting, the required tool number is determined.

Taking an impression is usually performed in several stages:

1. First, a thick paste is applied to a tray lubricated with an adhesive substance and an impression is taken. Manipulations are performed before preparing the elements in order to leave room for the corrective composition.
2. After tooth preparation, the gum pockets of the supporting elements are expanded. Retraction threads, pre-impregnated with vasoconstrictor compounds, are inserted into these grooves.
3. To stop bleeding from the periodontal pockets and fix the retraction threads, a cotton cylinder is placed into the prepared element.
4. The patient closes the teeth to ensure the gum pocket is dry.

The first layer of the print is shaped like the spoon with which it was made.

A layer of paste located on the top of the palate and along the edges is removed from the cast. This ensures free insertion of the impression into the oral cavity.

Intergingival partitions are also eliminated to eliminate the risk of squeezing the papillae located between the teeth.

The first layer of the product is thoroughly dried and filled with clarifying compounds. The impression is again filled with corrective pastes and left until completely dry. After this, the product is removed from the patient’s mouth.

There is another method for obtaining a dental imprint:

1. First, the specialist fills the dental tray with the basic composition, and then with the corrective one.
2. The correction paste is applied to the prepared units using a syringe.
3. A dental tray with two types of pastes is inserted into the oral cavity to obtain an impression.

For one-step impression taking, silicone masses are used. Despite minor deformation and shrinkage, the resulting prints must be used within several hours.

The video shows the process of taking dental impressions.

Process of creation

Making an impression begins with selecting a suitable spoon. It can be standard, customized or converted from a standard one.

In particular, the edge of a standard spoon may need to be lengthened or shortened. A properly selected tool makes it easier to obtain a high-quality impression.

Basic parameters that must be observed when selecting a spoon.

• The distance from its side to the teeth should be at least 3-4 mm. Too small a distance can lead to the transition of elastic deformation into plastic deformation when taking an impression, and the unsuitability of the impression.
• The convexity of the spoon should be approximately the same distance from the palate.
• For a low-frequency spoon, the lingual edge should be higher than the outer one.

Further, after selecting a tool, actions are performed in the following sequence:

• The edges of the tray are covered with adhesive plaster , the inner area is coated with a special adhesive that ensures the impression mixture sticks to the tray.
• corresponding to the clinical picture is selected
• Kneading. In a special mechanical mixer or on a surface suitable for mixing - coated or waxed paper, glass - the material is kneaded in strict accordance with the instructions.
  Cartridges with mixing tips pre-filled with mixtures can also be used.
• The patient's mouth is rinsed with an antiseptic.
• Place the prepared mixture flush with the edges of the spoon.
  Additionally, places in the oral cavity are coated where the mixture flows with difficulty, and there is a danger of the formation of zones with air - the vestibule of the mouth, the vault of the palate, the alveolar tubercles at the HF and the sublingual space at the LF.
• The corners of the mouth are covered with cream or Vaseline.
• The spoon is placed in the mouth with the left side, pushing away the corner of the mouth. Then the right corner is pulled back with the instrument, and the entire spoon is placed in the mouth in the row projection with the handle located along the midline of the dentition.
  Then the mixture, starting from the posterior sections, is pressed against the dentition. If excess mass is squeezed into the soft palate, it is carefully removed with a mirror.
• The patient's head should be held upright or tilted forward during the procedure . This is necessary so that the mass with saliva does not flow into the larynx and a gag reflex does not occur.
• Supporting the tray with his right hand, the dentist forms the outer edge of the impression with his left hand. To ensure the correct formation of the lingual edge of the LF, the tongue rises and moves forward.
• When the mass hardens (time according to the instructions), the impression is pulled off the teeth with the index fingers inserted into the lateral zones of the vestibule of the mouth. At the same time, press with your thumbs on the handle, removing the spoon from your teeth. You need to remove it carefully so as not to hit the teeth of the other jaw with the spoon.

The impression is considered good if the relief of the teeth and alveolar process is accurately imprinted, and there are no pores or blurriness.

Typically, impressions of the HF and LF are taken sequentially - first from one jaw, then from the other. But there is a technique in which an impression is taken simultaneously from both jaws.

From the moment the impressions are taken to the installation of the brace system, it can take from 1 week to a month, depending on the type and severity of the anomaly.

The video describes the entire process of taking an impression for braces.

Price

The price of a print depends on the following factors:

1. Features of the pathology. For example, in edentulous cases, individual dental trays are required to make impressions. This increases the cost of the procedure.
2. Type of material. Typically, specialists do not use expensive raw materials when cheaper materials, for example, alginate, can be used.

On average, casting a plaster model will cost patients 300 rubles, and making an alginate impression costs the same. A silicone impression will cost more – from 550 rubles.