How to make slime or slime from sodium tetraborate: 20 recipes

Sodium tetraborate (solution) used in making slimes is the sodium salt of boric acid, which is a medicine. You can buy it without a prescription at a pharmacy for 15-25 rubles. bottle. The same substance, but in powder form, is used to feed plants and kill insect pests. It is called borax or borax, sold in hardware stores for 100 rubles. for 50 g.

Sodium tetraborate is an excellent stabilizer; it produces the highest quality slimes. You should not abuse it so that the toy does not come out too tight. And you need to understand that this substance is slightly toxic, although it is also used in the food industry.

Fluffy without shaving foam

This slime should turn out fluffy and light, like a classic fluffy. It also crunches loudly and stretches far. It contains shaving gel, which can also thicken the composition, so the main activator should be added carefully, in small portions.

Recipe

3 tbsp. l. PVA glue,
1 tsp. shaving gel,
0.5 tsp. fat cream,
0.5 tsp. shampoo,
1 pea of toothpaste,
a few drops of sodium tetraborate,
liquid dye, decor - optional.

Cooking method

Place glue in a bowl and add shaving gel.
Add a little cream and the same amount of shampoo.
Read also: Comparative assessment of the effectiveness of three methods of gentle immobilization of the lower jaw for fractures
Add toothpaste to the mixture and make it homogeneous using a spoon.
Drop sodium tetraborate into the mixture and stir well until compacted.
Mash the slime with your hands until ready.
Apply paint to the surface of the toy and stir it.

Watch this video on how to make fluffy slime without shaving foam:

How to make a toy with your own hands without a chemical thickener: good proven methods

From a film mask

Squeeze the film out of the mask tube into a deep bowl.
Add eye shadow to color the slime.
Mix.
Pour one teaspoon of water and mix again.
Add some shaving foam.
Mix the mixture thoroughly. The foam eats up a little of the color, so add a little more shadow.
Thicken the mixture with liquid Persil.
Stir with a wooden stick until the slime stops sticking.

It is necessary to use a mask of this particular type, otherwise the slime will not have its characteristic properties.

Lightest Fluffy

Take a bottle and squeeze toothpaste into it.
Add tap water.
Shake until a thick foam forms.
Take a bowl and squeeze the mask film into it.
Add some water.
Open the bottle and squeeze the shaving foam into a bowl.
Stir and add a little soda.
Thicken the mixture with Naphthyzin nasal drops.
Stir the resulting slurry until thick.
Add dye of any color.

This slime has a very light texture and stretches well.

Transparent

Pour the transparent mask film into the container.
Add tap water at room temperature.
Stir the ingredients.
Dissolve 1 teaspoon of soda in 50 ml of hot water and cool.
Add another 1-2 tablespoons of soda to the container and visually determine whether more needs to be added.
Stir the composition.
We also add the lens liquid gradually and knead.
We look at the appearance to see if we still need to add a solution to clean the lenses.
When the slime has thickened, knead it with your hands for 10-15 minutes.
If necessary, add more dissolved soda and lens liquid.
The slime becomes thick, but at rest it can stick strongly to your hands.

When playing with slime, it can be stretched to a very thin film. If the mask does not smell very pleasant, then you can add some pleasant fragrance.

Fragrant from starch and shampoo

Pour shampoo into a deep plate and add a little potato or corn starch.
Stir with a silicone spatula until thickened.
If desired, it is possible to add a coloring agent.
Add a little vegetable oil and knead the mixture with your hands until it stops sticking to your hands.

To prevent the mixture from sticking to your hands, you can coat your palms with a little oil. This slime has a pleasant shampoo smell, stretches and wrinkles well.

Made from plasticine

In a metal bowl, soak 15 g of gelatin in 200 ml of water at room temperature.
Without stirring, leave the mixture for an hour.
When the gelatin has swelled, place the bowl on the stove over low heat.
We constantly interfere.
When the gelatin begins to boil, immediately remove the bowl from the stove and let the substance cool.
Take 100 g of plasticine and knead the piece with your hands until it becomes soft and pliable.
Mix softened plasticine with 50 ml of water and mix.
When the gelatin has cooled, it must be mixed with plasticine.
Mix the mixture as thoroughly as possible.
Leave the slime in the refrigerator for 15-20 minutes.

Sugar

Mix until smooth 5 tbsp. spoons of shampoo or liquid soap with 2 tbsp. spoons of sugar.
Cover the container tightly with a lid or stretch film.
Place the mixture in the refrigerator for at least one day.
If after a while the consistency suits you, then you can start playing with the slime. Otherwise, put the mixture back in the refrigerator for another day.

From salt and shampoo

Pour 200 ml of shampoo into a container.
Pour salt 1 tbsp. spoons until desired consistency.
You can add any dyes and decorations at this stage.
When the mixture becomes thick, put it in the freezer for 60-90 minutes. The more time the slime spends in freezing temperatures, the thicker it will become.

Creamy flour slime

Mix hand cream with flour.
Mix the mixture well with a spoon until completely coagulated.
If necessary, add a little more cream.
You can add glitter, dyes and other favorite decorations.

From toothpaste

Squeeze a little toothpaste from the tube into the container.
Add about 3 tbsp to it. spoons of shampoo and mix thoroughly.
If desired, add a couple of drops of dye.
If the mixture turns out to be very liquid, then add a little more paste.
Place the container with the slime in the freezer for 30-40 minutes.
Take the slime out of the freezer and knead it in your hands for 5-6 minutes.

Second from pasta

Squeeze a whole tube of toothpaste into an iron bowl.
Add any decorations; the mixture should have a homogeneous consistency.
Place the bowl over low heat and stir constantly for 10-15 minutes.
Remove the mixture from the heat and give it some time to cool.
When the mixture has become warm, you can begin to knead the substance with your hands.
If the slime sticks to your hands very strongly, you can lubricate it with a drop of sunflower oil.
We continue to warm up.

Mountain slime

This slime is made up of three different colored halves. Its preparation takes quite a lot of time, but the result will be a plastic toy with beautiful tints of shades. Everything will work out if the mass settles tightly in the container.

Ingredients

4 tbsp. l. PVA glue,
3 doses of liquid soap,
1 tsp. water,
0.4 tsp. hand or body cream
a few drops of sodium tetraborate.

For the second half of the slime take:

30 ml transparent glue,
0.5 tsp. water,
sodium tetraborate,
2 different dyes.

How to make slime

PVA glue is placed in a bowl and soap is added.
Water is poured there, then cream.
After stirring, add sodium tetraborate and again work with a spoon, and then with your hands.
Read also: German dental implants, manufacturers of implantation systems from Germany
Place the finished half of the slime in a container with a lid and set aside.
Office glue is poured into another bowl and water is added to it.
Mix immediately, pour in the thickener, work with a spoon until the mass thickens, and then with your hands.
The resulting transparent base is divided into 2 parts and painted in different colors.
Both halves are placed in an empty container next to each other.
White slime is placed on top, the container is closed and left alone for 1 day.

Watch this video on how to make mountain slime:

How to make thickening slime at home?

There are several possible options for replacing the listed types of thickeners. For example, dry starch can be replaced with ordinary wheat flour, which is available in almost every kitchen, but it is worth considering that the slime will thicken, but will not stretch as well as with starch, so if you want to make the toy more viscous, it is better not to use flour . You can also make your own thickener.

To do this you need:

Take a 1 liter bottle.
Pour in 100 milliliters of sodium tetraborate.
Add water to full volume.
Shake well.

This solution is suitable for thickening any slime, except edible ones. If necessary, the resulting universal composition can be added in the amount of 2-3 tablespoons to any ingredients.

Important! The advantage of such a homemade thickener is the resulting volume, which will last for a long time.

From office glue

This slime immediately turns out to be a thick white color. And when stretched, it becomes transparent, and air bubbles are visible inside. If you want to get a completely “glass” toy, after making it, you should put it in a closed container for 2-3 days. It will become completely transparent.

Proven slime recipe

2 tubes of transparent glue,
0.5 tsp. water,
4 pumps of clear liquid soap,
a few drops of sodium tetraborate,
decorative elements.

Cooking method

The glue is placed in a container and water is poured into it.
Soap is also added there.
Mix the transparent mass well.
Pour in sodium tetraborate and shake the contents of the container again.
The thickened and sticky mass is crushed by hand.
At the end, add beads and mix them into the slime.

Watch this video on how to make transparent slime:

With artificial snow

This method makes it possible to make snow or cloud slime. When stretched, cobwebs will be visible in its thickness. The toy should stick a little to your hands and have a delicate texture.

What to make from

a bag of artificial snow,
2 tsp. water,
65 ml stationery glue,
3 doses of shower gel,
a little gold dye
3 different paints and the same shades of glitter,
2-4 drops of sodium tetraborate.

How to cook

Combine “snow” with water and stir.
Pour glue into another bowl and add shower gel to it, shake too.
Add paint.
Add a little thickener.
Work with the mixture with a spoon until rolling, then with your hands.
While the mixture sticks a little to the skin, stir in artificial snow.
Divide into several segments, add bright dye and glitter to each.
Mix different colored pieces into one whole.

Watch this video on how to make snow slime:

From glue and borax

Slime made using this method is elastic. When it hits a hard surface, it springs like a ball. The mass has less stretch than the original slime, but it is very pleasant to the touch and has a loud “click” sound.

Ingredients

5 tbsp. l. PVA glue,
60-70 ml of borax solution,
nail polish.

Cooking method

Mix borax with water in a ratio of 1:4.
Add glue to the solution.
After a few seconds it will thicken, and then you need to collect it from the liquid with a spatula or stick.
Knead the mixture with your hands for a short time.
Paint with varnish, distributing it in the slime with your fingers.

We recommend reading about how to make slime without sodium tetraborate. From the article you will learn about proven recipes for slimes without tetraborate with the addition of shampoo, glue, lens fluid, freshener, soda and air plasticine. And here is more information about what slime is and what it is needed for.

Starry sky

To make this slime, you need to stock up on blue dye, as well as silver sparkles of different sizes. In addition, you will need PVA glue and Borax.

This hand chewing gum is made according to the classic recipe. Before thickening, the glue must be mixed with dye and glitter. After adding the activator, you get a beautiful toy with a pearlescent sheen.

6: Made from clear borax glue

The toy is similar to the one obtained using the previous method, but it is softer and stretches better. And the decorating element turns the slime into iridescent. You can also make a ball from this slime that will fly off the table surface when you hit it.

What you need to make slime

30 ml stationery glue (transparent),
30 ml colorless liquid soap,
10 ml borax,
40 ml water,
3-5 g of powder highlighter.

How to make at home

Send the glue into a container, and pour soap into it.
Mix the slime ingredients.
In another container, make a solution of borax and water, and pour a mixture of glue and soap into it.
Immediately begin to collect the thickening mass with a spatula.
Knead it a little with your fingers and, holding it in your hands, mix the highlighter into it.

Watch this video on how to make slime from clear glue with Borax:

Copper pipe connection

Copper pipelines are expensive. The investment can be justified with careful installation, which is often carried out by capillary soldering using borax as a flux.

It is worth noting that today, other fluxes are sold that are more convenient to use. One pipe is inserted into the second or fitting so that the gap does not exceed 0.4 mm.

Soldering time is short, 3 minutes. It is important that the parts remain stationary during operation. In order for the borax powder to stick to the surface, the copper is first heated with a torch.

For pipes with a diameter of up to 108 mm, the soldering process is carried out at low temperatures not exceeding 450°. The seam is wide (up to 50 mm), but not very strong. Wide pipes with a diameter greater than 159 mm are soldered at high temperatures. Only professionals can perform the procedure.

In both cases, the solder melt penetrates well into the capillaries of the parts, which contributes to the formation of strong connections. It is recommended to remove any remaining borax.

It must be remembered that soldering is accompanied by the formation of smoke, so you can only work in ventilated areas.

With sparkling water

This slime should come out large, fluffy, shiny and transparent when stretched. At the same time, it does not leave marks on the skin or surfaces. Another feature of it is loud sounds when squeezed with fingers.

Ingredients

30 ml PVA glue,
the same amount of transparent glue,
30 ml of sparkling water, preferably having a bright color,
7 tbsp. l. thick shampoo,
a little dye,
1 tsp. baby cream,
a pinch of soda,
0.5 tsp. boric acid solution.

How to cook it yourself

Squeeze PVA into a cup and add transparent glue.
Pour soda into the liquid, stir so that there are no clots.
Shampoo is added.
After stirring, tint the mass.
Pour cream into it and work in the liquid with a spoon.
Add soda and stir.
Thickener is added.
Mix until creamy with a spoon, then knead the slime in your hands.

Watch this video on how to make crispy slime:

Side effects

A side effect to the drug can only appear if there is a high sensitivity to the components.

These include:

Itching
Weakness
Possible skin rashes
Convulsions
Digestive disorders
Dermatitis
Failure of the menstrual cycle
Abdominal pain
Cardiopalmus
Anemia

You should stop using this drug if you experience any side effects and seek immediate medical attention.

Contraindications

Mechanical damage to the skin and mucous membrane
Breastfeeding and pregnancy
Hypersensitivity to individual components of the drug component
Drug intolerance

With corn starch

This recipe makes a thick, matte slime. And yet it is soft, easily stretched, and does not retain its shape for long.

Ingredients

4 tbsp. l. PVA glue,
any dye,
2 tsp. with a heap of cornstarch,
2 tbsp. l. shaving foam,
3-5 drops of sodium tetraborate.

Cooking method

The slime is made as follows:

You need to mix glue and paint.
Add starch and try to dissolve it in the mixture using a spoon.
Add shaving foam and stir.
Thicken the mass by adding sodium tetraborate.
Knead it until done.

Watch this video on how to make slime from cornstarch:

Toy storage features

Slime without packaging dries quickly, so you need to store it in an airtight container with a closed lid. This will protect the toy from weathering and ensure its long service life.

As for the storage location, you need to choose something dark, dry and cool. The refrigerator door is best for this. Storage in the freezer is unacceptable: after defrosting, the toy will lose its elasticity.

Slime storage

Slime also doesn’t like moisture, so it needs to be stored in a dry place. As for a store-bought toy, it must be stored in its original packaging.

Sodium tetraborate is not only a drug used in medical practice, but also the main ingredient for creating slimes. When working with borax, you must adhere to safety rules, as well as the recipe for creating slime. The product should also be stored correctly so that it can serve for a long time and delight children.

With toothpaste

This slime should turn out fluffy and voluminous, despite the small amount of glue. It gets your hands a little dirty, but it stretches well, crunches and doesn’t lose its fluffiness when squeezed.

Components

2 tbsp. l. white toothpaste,
the same amount of shampoo
3 tbsp. l. PVA glue,
0.5 tsp. sodium tetraborate,
2 different dyes.

Cook at home

Place toothpaste and shampoo in one bowl.
Whisk for 3 minutes.
Add glue to the mixture and stir it.
Pour in sodium tetraborate.
Help him stabilize the mass using a stirrer.
Divide the slime into two parts and color both.
Mix the multi-colored segments into one.

Watch this video on how to make slimes from toothpaste:

What thickeners can be used for slime?

If you want to make a thickener for slime at home, you can use any recipe. How to thicken slime at home? Below are the most popular substances from which you can make slime with a thick consistency.

Sodium tetraborate

Sodium tetraborate is often called borax. The substance goes on sale most often in the form of a powder containing a 20% glycerin solution.

The use of sodium tetraborate makes the slime especially soft and elastic. In this case, the base may not contain glycerin. Using sodium tetraborate, there is no doubt that the mucus will be of the desired consistency.

Boric acid

To make one small slime you will need half a teaspoon of acid. The interaction of the drug substances with soapy water promotes the formation of tetraborate, which helps to increase the softness of the toy. Boric acid will quickly thicken the toy.

Gelatin helps thicken the mass

Baking soda

During the preparation process, you will need to mix a certain amount of soda (1.5 tsp) with 50 g of base and 120 ml of slightly warmed water with a small amount of hydrogen peroxide. Baking soda makes it possible not only to achieve the best anti-stress consistency, but also to prevent the slime from sticking to your hands. The composition will thicken quickly. The toy will turn out to be jelly and similar to Ninja slime.

Liquid for lenses

How to make a thickener for slime? To make an activator, you should use a lens solution mixed with baking soda. The composition is gradually added to the base.

For reference! Using liquid for lenses allows you to make anti-stress voluminous.

Liquid starch

What can replace sodium tetraborate for slime? Quite often people use liquid starch. To create a thickener, you will need to mix 180 ml of a product that contains boron with the base.

The activator can be made from powdered sugar

Eye drops

All eye drops contain boric acid. Considering that the acid is added to the medicine in small quantities, it is worth purchasing several packages of the medicine at the pharmacy.

Corn starch

Starch is also suitable for making a thickener. You will need to mix it with thick shampoo. The composition will thicken quickly. The made toy will last a short period of time (no more than 20 hours), but you can always make slime using this simple recipe again.

Gelatin

To make slime, you can use gelatin. 1 sachet of the substance is mixed with 100 ml of warm water. After thoroughly mixing the components, add the slightly melted plasticine mixture. In this case, a small amount of shower gel should be used as a thickener.

Hairspray can be used instead of soap

From a film mask, without glue

This is one of the easiest ways to make crunchy slime. It doesn't turn out to be very big, but it stretches without tears and inflates like chewing gum.

Simple recipe

3 tbsp. l. film masks,
1 tsp. hand cream,
4 tbsp. l. shaving foam,
a few drops of sodium tetraborate.

Preparation method

Mix the film mask and hand cream.
Make the mass more voluminous using shaving foam.
Mix the components again.
Thicken the mass with sodium tetraborate.
Mix with a spoon and fingers.

Watch this video on how to make slime from shampoo and toothpaste:

Useful tips

If you go too far with the thickener, add a couple of drops of glycerin.
Gouache, acrylic paints, and liquid food coloring are suitable for coloring slimes.
Experiment with recipes. Some brands of office glue cannot be mixed with a thickener enough. Sometimes additional ingredients are required - hand cream, shampoo, shaving foam.
Prepare dishes, surfaces and wash your hands thoroughly. This will make the slime more transparent and the color cleaner.
Store slimes in closed jars. This way they will last longer.
Maintain temperature. After refrigeration, the slime will become hard and will have to be kneaded. And in the sun or near a battery it will dry out. Store slime in a dark place at room temperature.
If the slime does not thicken at all and is very sticky, add an activator (sodium tetraborate, boric acid, etc.). Conversely, if you have overfilled the thickener, add more glue and a little water.

Sliming is a new but exciting hobby for children and adults. Make your first slime using silicate glue with our recipes or create your own.

Made from two types of glue

This toy is essentially made of two components: glue and thickener. That's why it always works out. You can make a lot of slimes using this recipe using different decor.

What do you need for slime?

65 ml PVA glue,
30 ml stationery glue,
aqueous solution of sodium tetraborate,
dye, glitter.

How to cook it yourself

You need to mix both types of glue.
Add sodium tetraborate a little at a time several times, constantly stirring the mixture with a spoon.
When it looks like semolina porridge with lumps, you need to take it in your hands and actively knead it.
Color the almost finished slime and add decoration by kneading the toy.

Watch this video on how to make slime from glue and sodium tetraborate:

Safety regulations

Tetraborate is used as a preservative in creams and as an antiseptic, which can be applied to mucous membranes. Therefore, slime made with its addition is suitable for play. After all, when used correctly, the product does not pose any danger. The exception is people with individual intolerance to a chemical solution.

Tetraborate may cause a chemical reaction. In this case, it is better not to use it.

When preparing slime with the addition of sodium tetraborate, you must adhere to the following safety rules:

avoid contact with eyes;
do not ingest;
do not make edible slimes with this substance;
Use only special containers when making slimes;
After playing with slime, you need to wash your hands thoroughly with soap.

With glycerin

Even a novice slimer can make a slime using this recipe if the glue is chosen correctly. The toy will be an original type, it can be decorated with sparkles or any pigment.

Easy recipe

2 tsp. water,
1 tsp. shampoo,
0.5 tsp. cream or 1 tsp. glycerin,
5 tsp. PVA glue,
a little sodium tetraborate or Naphthyzin with soda.

Cooking method

Pour water and shampoo into the bowl and mix with a spoon.
Add cream, mix.
Pour glue into the foamy liquid and make it homogeneous using a spoon.
Add sodium tetraborate in portions, stir until the mixture coagulates.
Make the slime cooler by squishing it in your hands.

Watch this video on how to make slime with glycerin:

Sequencing

Fill half the mixing container with polyvinyl alcohol. No matter what the volume of the container, the main thing is to accurately observe the proportions.
Pour in two teaspoons of borax and stir slowly. It is necessary to mix thoroughly until the clots are completely removed and a homogeneous mass is obtained.
After thoroughly mixing the mass, you should get something resembling a slime. It needs to be thoroughly mashed and mixed thoroughly until fully cooked.

Now you can play with him. This slime should also be stored in a closed container. The better the storage conditions and the less contaminants that get on the toy, the longer it will last. Polyvinyl alcohol is a polymer, like other glues, milk and other substances, therefore, when interacting with sodium tetraborate, they form a chemical bond that is not very stable, and the bond may break down as you play.

Neon with plasticine

This toy is especially fun to make and play with in a dimly lit room. Thanks to the neon components, it glows. At the same time, there is nothing complicated in the recipe; even a beginner slimer can handle it.

What can it be made from?

50 ml neon glue,
1-2 g neon sparkles,
a small piece of plasticine with foam balls,
a few drops of borax solution (125 ml of water per 10 g of powder).

Cooking method

The glue is poured into the dishes.
Add glitter.
Place plasticine and stir everything.
Stabilizer is added.
Stir with a spoon and hands until done.

Watch this video on how to make neon slime:

Authenticity

Qualitative reaction. To 5 ml of a 4% solution add 0.1 ml of a 0.1% phenolphthalein solution; the solution turns red. When adding 5 ml of glycerin, the 85% solution should become colorless.

Qualitative reaction. To 0.2 g of the substance add 1 ml of concentrated sulfuric acid, 3 ml of 96% alcohol and mix. When ignited, the mixture should burn with a green-edged flame.
Qualitative reaction. A 4% solution should give a characteristic reaction A to sodium (General Pharmacopoeia Monograph “General reactions to authenticity”).

With hair foam

This recipe allows you to save on some components, because shaving cream is cheaper than foam. Nevertheless, the result is a lush fluffy slime, thanks to the hair product and whipping the mass during the manufacturing process.

Fluffy Sloughm Recipe

2 tsp. shower gel,
0.5 tsp. shaving cream,
2 tsp. with a foam top for the care of weakened hair,
4 tsp. transparent glue (it can be tinted with any pigment),
glitter,
borax solution, which is made from 125 ml of water and 10 g of the main component.

How to do

Place shower gel and shaving cream in one bowl and mix.
Add hair foam.
After mixing the previous components, pour in the glue and shake the liquid with a spoon until fluffy.
Add glitter.
Pour in the borax solution and stir until it curls.
Then knead the mass with your hands.

Watch this video on how to make fluffy slime without glue and without shaving foam:

Algorithm for creating slime

Pour seven tablespoons of sour milk into a container.
Add one spoon of acetic acid and mix everything until any lumps and clots that may appear during the mixing process are removed.
After such a reaction, a precipitate forms; it is necessary to use a sieve and strain the mixture. The entire liquid part of the mixture must leave the reaction zone.
To the resulting sediment you need to add a quarter spoon of soda. A reaction will begin with the release of carbon dioxide.

Now the slime is ready. When carrying out this reaction, you must be extremely careful, since the experiment uses acid and alkali. Safety precautions must be observed when conducting such experiments. Milk contains casein, which, when interacting with acid, creates this mass.

Good luck in making and storing slime! Have fun and have amazing emotions!

With starch and body lotion

This recipe produces fluffy, textured fluffy slime. It is also elastic and soft, with a noticeable shine thanks to the body lotion.

What to make from

5 tbsp. l. PVA glue,
2 tsp. cold water,
0.5 tsp. body lotion,
2-3 tsp. starch,
6 tbsp. l. shaving foam,
dye,
borax.

Step-by-step instruction

You need to pour glue and water into one bowl.

Add creamy body lotion, make the liquid homogeneous.
Add starch and mix again.
Add shaving foam and distribute it evenly throughout the mixture.
Color the slime.
Pour in a few drops of borax, working continuously with a spatula.
If the mass has thickened but remains sticky, knead it with your hands.

Watch this video on how to make airy slime:

Glossy with oil for baby skin

This slime has a glossy shine and shimmer. It is also very soft, so it has a flowing texture, but it can also be assembled into rosettes.

Ingredients for glossy slime

2 tubes of transparent Brauberg glue,
1 tube of Luch glue,
1 tsp. oils for baby skin care,
1 tsp. rich hand or body cream,
a drop of dye,
aqueous solution of sodium tetraborate (2 tsp per 1 glass of liquid).

Cooking method

Mix both types of glue well in a cup.
Add butter and cream, mix too.
Tint the mass with liquid pigment.
Pour in a few drops of thickener.
Mix the slime well.

Watch this video on how to make glossy slime:

What is this substance, why is it added to slime?

Sodium tetraborate is popularly called borax or borax . The substance has an antiseptic effect. Thanks to this property, it can be used as a preservative in the cosmetics industry and in the production of medicines. It is an important ingredient in the production of boric acid, which can also be used in making slime.

When producing slimes, tetraborate is used as a thickener. It is added at the final stage, when the mass is ready and painted in the desired color. A few drops of the substance help turn the mixture into a toy. With such a small amount of money, it will last a long time.

From raw egg white

Slime made using the proposed method is light and small. But you can stretch it until it becomes transparent and blow out bubbles. It’s better to store it in a cool place so that it doesn’t spoil longer.

Ingredients for slime

1 chicken egg,
2-3 tbsp. l. film masks,
a little paint,
sodium tetraborate or Teymurov foot spray.

How to make it at home

Remove the white from the egg, that is, punch a hole in the shell through which the desired component is shaken out into a cup.
Beat it until fluffy, using a whisk or mixer.
Add the film mask and mix.
Add color to the liquid.
Pour sodium tetraborate into it, knead until thick.

Watch this video on how to make slime from an egg:

With light plasticine

This is one of the easy ways to make butter slime. It spreads like butter, but also stretches and clicks well.

What to make butter slime from

60 ml PVA glue,
0.5 tsp. water,
1-2 tsp. liquid soap,
0.5 tsp borax,
a bag of light plasticine.

How to make

Pour water into the glue in the cup.
Add liquid soap to the mixture and shake everything with a stick.
Pour in borax, stir until curdled.
When the slime stops leaving marks on your hands, you need to mix it with light plasticine until smooth.

Watch this video on how to make butter slime:

Very soft but not sticky

Ingredients

To make a slippery slime with your own hands you will need:

a teaspoon of regular baking soda (do not use soda ash, it is too caustic and you cannot play with such a slime); a full glass of hot (60-70 degrees) water; fresh liquid gouache (a piece the size of a fingernail); 100 ml of thick PVA (it is very important that it is fresh and of high quality, otherwise you will not succeed and you will waste your time).

In any method for making slime, Luch brand PVA always works well. For other effective adhesive components, read the article “What glue is suitable for slime.”

Step-by-step instruction

Prepare a thickener solution that you will use instead of tetrabort. Pour baking soda into a glass of water and stir vigorously until the powder dissolves. Then leave the liquid to cool for about 20 minutes. It cannot be used hot. The water should be at room temperature.

How to make slime at home: mix PVA and gouache until the liquid acquires a uniform color. After this, pour in a teaspoon of soda liquid and knead the mass until it becomes dense and viscous.

If necessary, you can add a little more thickener to the glue mixture. As a result, you will be able to make a very slippery, but not at all sticky slime with your own hands without the help of tetraborate.

From Vaseline and glue

This recipe is used to make jelly slime, which also has a shiny surface. So this toy can be considered both a jiggly and a glossy. The slime stretches well and makes a loud click when touched.

Components

200 ml hot water,
a jar of Vaseline (10 g),
dye,
3 tubes of transparent glue,
0.5 tsp. sodium tetraborate.

Do it yourself

Place Vaseline in the water and use a spoon to help it dissolve.
Add some paint.
Pour glue into the liquid and stir.
Add sodium tetraborate drop by drop and work the mixture with a spoon until it thickens.

Watch this video on how to make slime from water and Vaseline:

History of creation

Handgam was first introduced in America back in 1976. The company that created this toy invested a huge amount of money in promoting the product, but in those years such an invention did not gain popularity. But nowadays everyone knows about such a wonderful toy, more and more people are trying to make it themselves, because in the process of creation you can not only get a sea of new impressions, positive emotions and emotions, but also new knowledge in the field of chemistry. And when using slime, you can gain knowledge in the field of physics and find out what feature is found in a non-Newtonian liquid.

From shower gel and hand cream

This method can be used to make large rainbow slime. Its texture is so delicate that the shades of the colors used imperceptibly flow into one another. And the abundance of oil components makes the slime also glossy.

Components

100 ml transparent glue,
50 ml PVA glue,
1 tsp water,
1 tsp body milk,
2 tsp. shower gel,
1 tsp. hand cream,
0.5 tsp. aqueous solution of sodium teraborate,
4 different dyes.

How to make slime

Mix both glues.
Pour water into the same cup and spread it with a spatula.
Add body milk, then shower gel, stirring the liquid after each ingredient.
Supplement the mixture with hand cream.
After thoroughly stirring, pour in the sodium tetraborate.
Knead until thick with a spoon, then with your hands (if this does not help, you should add more activator).
Divide the slime into 4 parts, paint each one a different color by dropping pigment and squeezing the mass with your fingers.
Place the segments in a container next to each other, tightly, close the lid and do not touch for 2 days.

We recommend reading about how to make slime without a thickener. From the article you will learn about options for making slime with and without glue. And here is more information on how to remove slime from clothes.

Sodium tetraborate makes creating slime very simple, this thickener works flawlessly. The main thing is not to put too much of it, do not waste time kneading the mass. And if there is an excess of thickener in it, you can save the toy with water, shower gel or fatty cream.

Useful video

Watch this video on how to make glossy slime:

What is sodium tetraborate

Sodium tetraborate (borax) is a compound of inorganic origin. Chemical formula of the compound Na2B4O7. It has two common forms of release: sodium salt and glycerin solution. Sodium salt is used in light industry, and glycerin solution is used in pharmacology.

Main characteristics of sodium tetraborate:

Release form. A 20% solution of boron in glycerin is usually produced in bottles with a capacity of 30 g.
Terms of sale. Sold in pharmacies, available without a prescription. There are cases when a pharmacist refuses to sell a child, in which case an adult needs to buy the drug.
Storage conditions. The solution should be stored in a dark place in the original packaging at an air temperature of up to +25 degrees, out of the reach of children.
The shelf life of the drug is 2 years in the original packaging. After the expiration date, the solution cannot be used.

Terms of sale of sodium tetraborate