Impro ICX Semados Ankylos Xive
Dental implants began to be produced in Russia in the mid-90s. This allowed engineers and implantologists to use foreign experience and scientific research data in their development. Russian dental implants meet modern requirements for the physical properties of products—highly purified medical titanium is used in their production, and the surface is sandblasted. Unfortunately, in the field of technology and methodology, domestic products are inferior to foreign ones.
Catalogs
- LIKO-M [2,37Mb PDF]
- LIKO-M Evolution [0.86Mb PDF]
- LIKO-M Slim 3 mm [2,06Mb PDF]
- LIKO-M Mini [1.5Mb PDF]
- Orthopedic components [5.94Mb PDF]
- Toolkit [2.53Mb PDF]
Rating of dental implants for those who want to understand
Survival rate
The main indicator in the ranking. The percentage of statistical survival of titanium rods is calculated in the course of large-scale studies conducted by competent independent organizations.
For top brands this figure is above 99%, for others it is slightly lower: from 95% to 98.8%. It is important to understand here that the more time the implantation system is used in clinical practice, the more reliable this figure is and it can be trusted.
Not everything depends on implants
The success of implant treatment also depends on the qualifications of the doctor and the patient’s compliance with recommendations during the rehabilitation period.
Osseointegration
The surface treatment technology of a titanium rod is the main factor influencing the speed and quality of its osseointegration (i.e. fusion with bone tissue). The success of treatment greatly depends on this.
For premium systems, osseointegration takes 1.5-2 months, for budget systems - 3-6 months.
Tested on a large sample
Leading manufacturers of implantation systems conduct extensive clinical trials proving the high rates of osseointegration of their titanium pins even in difficult situations, for example, in patients with diabetes or after radiation therapy.
Manufacturer's warranty
Only some manufacturers offer a lifetime warranty on their dental implants. If the artificial root is rejected after many years through no fault of the patient, the manufacturer undertakes to provide a replacement titanium rod free of charge.
Most companies provide a guarantee for their implantation systems for up to 10-20 years. Obviously, it is better to choose implants with a lifetime warranty from the manufacturer.
The guarantee is good, but it doesn’t work everywhere
Despite their reliability and lifetime warranty from the manufacturer, some implantation systems are not widespread in Russia or do not have an official representative office. If you choose them, you may encounter difficulties in delivering original components or obtaining a similar titanium rod under warranty if it is rejected.
Implant-abutment connection type
The service life of the artificial root depends on this factor. There are two types of connection: flat and conical. The best implants are those with a conical connection to an abutment.
Firstly, it removes the gap between the crown and the titanium rod, where microorganisms could enter and lead to rejection of the artificial root. Secondly, it will withstand heavy loads and will not cause bone resorption around the titanium pin.
Material
The survival rate of an artificial root depends on the purity of the titanium from which it is made. The most common is pure titanium Grade 4 (2% impurity content). Some manufacturers use Grade 5 - less pure, it contains impurities of vanadium (4%) and aluminum (6%). The presence of impurities increases the strength characteristics of titanium rods, but negatively affects the rate of osseointegration.
Orthopedic briefcase
Not only the aesthetics, but also the functionality of the treatment result depends on the breadth of choice of solutions for prosthetics. Each manufacturer has its own orthopedic portfolio. The richer it is, the better for the patient.
If you use some budget systems, for example Alpha Bio, in non-standard situations you will have to sacrifice aesthetics, since they do not have a wide selection of abutments and other elements for orthopedic solutions.
Biomal
In the ranking of Russian implant manufacturers, Biomal takes 3rd place among young ones. But the implant that it produces was developed back in the 80s of the last century. It was modified, new technical solutions were applied and a system was obtained that was different from the products of other companies.
The Biomal system is designed as a multi-unit
— the pin and abutment are connected into one structure. It is suitable for single-stage protocols.
The self-tapping thread of the pin provides sufficient fixation for immediate installation of a temporary prosthesis. The surface is treated with bioinert ceramics, which accelerates osseointegration.
The company produces 3 types of conical implants, with a diameter of 3.5 and 4.5 mm. Length – 8-16 mm.
The implants are approved for use by the Ministry of Health and Social Development of the Russian Federation.
Main characteristics of Iris dental structures
IRIS produces LIKO-M dental implants, they are characterized by:
- Big choice. The presence of rods of different shapes and sizes (in diameter - from 3.0 to 5 mm, in length - from 8 to 14 mm) makes it possible to treat various clinical cases.
- Easy to install (thanks to in-house produced surgical instruments).
The rods are sandblasted and double acid etched. This imparts porosity to the surface, similar to bone structure, which promotes rapid bone healing and regeneration . Additionally, the rods are treated with argon plasma.
Features of Russian IRIS implants
Russian IRIS implants are the most famous brand of domestic systems for dental implantology. They are released.
IRIS implants meet all modern requirements and have a number of characteristic features:
Systems are manufactured from purified titanium alloy;
The implants have a unique surface microrelief, which ensures high-quality and rapid engraftment of the titanium root;
The systems are equipped with a conical connection that prevents pathogenic microflora from penetrating into the structure;
The shape of the implants creates the maximum area of contact between the rod and natural tissues;
Russian IRIS implants are durable, aesthetic and suitable for successfully solving various clinical problems.
Which implant is better: compare quality and prices
German Dentmol (DENTMOL)
For a turnkey installation with a metal-ceramic crown, you need to pay from 50,000 rubles, with a ceramic one - from 60,000 rubles. Pros:
- the use of bioinert, biocompatible material promotes complete osseointegration;
- bioceramics in the composition are used for allergies to metal;
- accelerated tissue healing without risk to the patient’s health;
- prosthetics are possible without the use of metal;
- excellent mechanical properties;
- wear resistance;
- aesthetics.
MIS implants from Israel
Implantation of MIS on a turn-key basis with the installation of a metal-ceramic crown will cost no less than 40,000 rubles, with a ceramic one - from 50,000 rubles. Implants are famous for:
- high strength;
- minimum contraindications;
- accelerated engraftment;
- 5-year guarantee, according to which if the titanium root is rejected within 5 years after the operation, replacement is carried out free of charge;
- affordable price;
- minimal bone damage;
- the postoperative period is not accompanied by complications;
- long service life;
- possibility of individual selection of implant.
Swedish designs Astra Tech (Astra Tech)
The cost of turnkey Astra implantation with a metal-ceramic crown starts from 62,000 rubles, with a ceramic one - from 80,000 rubles. Characteristics:
- OsseoSpeed coating ensures accelerated bone regeneration in a large volume;
- the conical shape is responsible for the reliable connection of the titanium root with the abutment;
- biomechanical bone stimulation;
- expanded contact zone of soft tissues.
Russian Rusimplant implants are produced in several series
"Leader" Russian implants
Universal dental implants suitable for solving a wide range of clinical problems. The series systems have self-tapping threads; they can be installed in bone tissue of weakened density.
"Short"
Russian implants "Rusimplant" of the "Short" series have an increased diameter width and at the same time a minimum rod length. They can be used in basal implantation, with severe atrophy of bone tissue, while making it possible to do without preliminary osteoplasty.
"Assets"
Implants of the “Active” series are used in cases of bone volume deficiency. The products have a special type of shape to avoid injury to weakened bone tissue, and the hollow design of titanium rods allows the natural nutrition of the bone to be preserved.
Also well-known lines of dental implants from Russia are: “Lux”, “Standard”, “Mini”, “Small”.
The main advantage of Russian implantation systems is their affordable price.
It is almost two times lower than the cost of implants from Israel and Korea, and at the same time, Russian systems have good quality, are easy to install, and are optimal for use in the restoration of chewing teeth. The main disadvantage of systems from Rusimplant is the insufficient level of aesthetics. If implantation is planned to restore teeth in the smile area, it is recommended to opt for more expensive implants from foreign brands.
The average price for Russian implants in Moscow starts at 6,000 rubles.
Cost of implantation
The cost of the surgical stage of restoration using Iris implants is 16-37 thousand rubles. The use of titanium-based products takes less time, which makes GRADE-4 stand out and becomes the basis for such a price increase. In terms of price, the products are close to premium products from American and European brands. But this is entirely due to the quality, durability and other properties of the implants. Many today prefer this particular system, as it is reliable, safe and has high survival rates.
Russian dental implants "Konmet"
The Konmet company appeared on the implantology market in 1996. The company produces dental implants, as well as instruments for dental implantation.
Implants from the Russian brand “Konmet” have the following characteristics:
Hypoallergenic materials are used for the production of systems. The implants are made from a special alloy and have a special type of coating made of aluminum oxide and titanium powder, which ensures short healing times for artificial roots;
The manufacturer offers systems for classical implantation; the company also produces implants for immediate implantation - immediately after removal of a damaged tooth;
The reinforced design of the neck of Russian Konmet implants allows you to achieve correct and
uniform distribution of chewing load; A wide range of products allows you to select the optimal system option for clinical cases of varying degrees of complexity;
It is possible to manufacture individual implants and abutments for a specific patient.
At this point in time, the manufacturer offers three main lines of dental implants:
- Classic implants with diameters from four to 4.8 millimeters with different rod lengths. Artificial roots have a double and fairly aggressive thread, which contributes to excellent primary stabilization of the implanted implant.
- Cylindrical implants used when the height of the jaw bone is insufficient. Most often used in express implantation;
- Cone-shaped implants. Used for narrow interdental spaces.
The average price for Russian Konmet implants is from 17-18 thousand rubles per unit.
Russian or foreign implants: what to choose?
Despite their excellent quality and durability, Russian implants have one significant drawback - they do not provide high aesthetics, which is important when restoring dental units included in the smile zone. Therefore, if you have to restore your front teeth, then it would be better to choose implant systems from premium foreign brands. It will also be justified to choose more expensive implants if there are some anomalies in the structure of the dental system.
When restoring chewing teeth that are not visible to people around you when talking and laughing, aesthetics is not of paramount importance, and therefore it is quite possible to save money and carry out the operation with inexpensive Russian dental implants. Do you want to learn more useful details about implantation and make the right choice of implants? Make an appointment with specialists at our clinic in Moscow - Vanstom.
Our dentistry staff consists of competent implantologists who have extensive practice and regularly improve their qualifications abroad - in Europe and the USA. To make an appointment with a specialist, just dial our contact phone number or ask a question you are interested in in the interactive chat on our website!
Advantages of IRIS implants
- Manufactured using the latest developments and precision Swiss equipment in Italy.
- Multi-level quality control - the strictest standards are met.
- Good biocompatibility of pure titanium rods with the jaw bone.
- Tested in clinical conditions - several decades of testing contributes to achieving the maximum degree of patient safety during surgery.
- Due to the variety of shapes and sizes, treatment is possible in any situation.
Universality and applicability to all clinical cases
IRIS designs are available in several groups:
- LIKO-M Evolution products with a special macro-thread, which allows the design to be used with weakened, thinned or porous bone tissue, for one-step installation with immediate loading;
- thin SLIM products with a diameter of 3 millimeters are used to restore the lower and upper incisors; they can be used for bone deficiency without the need for plastic surgery;
- MINI products for fixed and removable temporary dentures are selected in accordance with anatomical features and individually for each case.
According to the studies, the postoperative period goes well, the Patients have no complications. Implants are installed quickly; there is practically no bone resorption in the cervical area in the first three years after fixation. The indicators do not exceed 1 millimeter, which corresponds to accepted international requirements. During the use of the product, there were also no cases of fracture or removal of artificial bones due to complications.
Advantages:
- use of Swiss equipment for production;
- quality control at every stage of production;
- use of G4 titanium without impurities;
- versatility, availability of several product lines for use in different cases;
- integration is fast due to the rough surface;
- the presence of abutments, selected individually, in accordance with the anatomical features;
- lifetime warranty.