Removable dentures: what they are, types of prosthetics, how an artificial false jaw is attached

Korostelev Egor Dmitrievich
Source:
Clinic “It Doesn’t Hurt!”
Enlarge
When making any removable denture (complete, partial), regardless of the material of the prosthesis (acrylic plastic, acry-free, nylon or clasp denture), the patient goes through the same steps. Usually you have to make 4 visits to the dentist.

Artificial jaws: types

First of all, let's define the terminology to make the following text easier to understand.

• Basis - the base, which looks very similar to the gum, fits tightly to the oral cavity. The borders are made of modern polymer materials.
• Fastening – various locks with hooks securing the entire structure to supporting healthy organs.
• Implants are elements firmly embedded in the base, replacing individual chewing units. In production, light components are used that are as close in color to real teeth as possible.

Classification by type

Types are divided according to the substances contained in the composition. However, a distinction based on how partial dentures are placed, how they are inserted and secured, and what the dentures look like is the most correct approach.

Lamellar

The most inexpensive and accessible way to restore chewing functions. The plastic base completely covers the curves in the patient’s mouth and the contours of the gums. They are attached to supporting intact masticatory organs. Acrylic, nylon, and other modern materials that prevent allergic reactions are used in the production of these implants.

Low cost with simple fixation are the main advantages. The age group of patients for their use is not limited. However, the restoration of chewing functions does not occur completely; diction may be impaired, and the structure does not hold well in the mouth. The photo shows the installation of removable plate and one-sided dentures on hooks.

Clasp

Artificial analogues are attached to a metal frame. Since the base is made of durable material, the product will last quite a long time. Installed using various hooks, crowns and other methods.

This type of substitution is not suitable for those who have allergic reactions to the main component. High cost is also a significant disadvantage. Among the positive features are strength, strong fixation, complete restoration, natural appearance.

Immediates

They cannot be considered a permanent solution, as they are temporary measures. The installation of partially removable dentures is shown in the photo.

For a short period of time they can completely restore all aesthetic and chewing functions. But, it should be remembered that their use is only possible when one or two damaged units are restored.

Low cost along with quick installation are positive aspects. Soft components make the implant unstable to heavy loads and greatly reduce its service life. The use of immediates is common in dental practice when it is necessary to prevent the displacement of remaining teeth towards the removed ones.

Is it possible to glue a prosthesis with Moment glue?

Instant glue “Second”, “Moment”, “Super” and other trade names are available for sale. The point is not in the title, but in the content. This is cyanoacrylate. A substance that has excellent adhesion to most polymeric and inorganic substances. Its main advantage is its very fast setting.

It is ideally suited for gluing plastics. It would seem that there is no need to invent any special compositions - just apply a few drops of “Super Moment” and the prosthesis is ready for use again.

Not so simple. There are more negative points than positive ones:

• The glue contains a deadly cyanide base;
• “Super” glue is poorly resistant to aggressive environments and water. In them it quickly collapses. Microorganisms living in the oral cavity destroy the adhesive bond in 14-20 days. After this, the prosthesis will have to be repaired again.
• During the gluing process, a bead of dissolved acrylate is formed. In sensitive people, it can injure the palate and tongue.
• The glue is extremely fluid. It is difficult to accurately apply it to the edge of the fracture. Leaked glue dissolves the surface of the prosthesis and makes it rough. Because of this, the effect of suction to the palate is reduced. The prosthesis begins to wobble. Residues of food accumulate under it.
• It can only be used in an emergency situation, far from the centers of civilization. A prosthesis repaired in this way is not subject to warranty repair. And for restoration in a workshop you will have to pay at least double the price.

In conclusion, it remains to be stated that any dental workshop is a faithful and reliable friend in matters of repair and restoration of dentures.

How to make a denture, a completely artificial false jaw: materials

The components that form the basis of such products determine the quality of human life. Good and durable, anti-allergenic, do not cause discomfort, are installed painlessly, quickly and easily. The main thing is that there is no rejection.

Prostheses from the low price segment are often manufactured in a short time. However, they do not tolerate heavy loads well, do not last long, and can cause unpleasant sensations: itching, irritation of the oral cavity.

Plastic

Affordable and widespread chemical material. It is used in all spheres of human life: from domestic needs to medical. It gained popularity due to its efficiency and easy processing.

Low cost greatly influenced its development in dentistry. The affordable price is perhaps its only advantage in this area. Simple installation, fastening of partially removable and fully overlay plate dentures with the palate has the following reviews:

• fall out;
• ugly appearance;
• cause severe discomfort while eating due to unevenly distributed load.

Particularly weak attachment in the lower jaw area. The sublingual space is uneven, so it is impossible to attach a classic suction cup to it. The problem is solved as follows:

• use special creams for retention;
• installation of the lower chewing part is carried out on living units.

Orthopedic products are held in place by clasps, which grip the implant at the base and give the structure the necessary rigidity. The most popular are removable dentures ivocap with the following pros and cons.

Positive traits:

• the upper jaw has good stability;
• low cost;
• common;
• suitable for repair;
• ease of construction;
• unpretentious in care.

Negative sides:

• a large frame takes up a lot of space in the mouth;
• clasps are noticeable with close eye contact;
• the lower part is poorly fixed;
• the alveolar arch and process gradually atrophy;
• short-lived.

Recommended as a temporary solution, or for complete/partial edentia.

Made from acrylic

The most inexpensive and widespread prostheses, which are based on polymer masses of low cost and quality. Among all lamellar ones, they are able to provide acceptable aesthetics. They are highly allergenic, fall out, break and cause discomfort.

Acry-free

Removable dentures or dentures made from an improved polymer relieve its owner from possible irritation of the oral cavity, are more durable, and reduce the risk of breakage.

An excellent option for temporary solutions while a high-quality and durable replacement is manufactured. People with hypersensitivity can easily wear them until full implants are inserted.

Spofadent

The base is made of three-layer plastic. They are characterized by durability, strength, resistance to chemical compounds, and visual appeal.

The design is loved by dentists and clients for its beautiful appearance. A colored complete removable denture is an analogue of living tissue.

IvoBase

Polymethyl methacrylate is an organic plastic that has innovative properties thanks to a unique creation method (the polymer is mixed in an injection device):

• greatly reduces the risk of an allergic reaction;
• prevents hypersensitivity;
• eliminates errors (low bite, large shrinkage).

Automation follows the entire technological process exactly. As a result, porosity decreases and strength increases. These properties ensure the durability of the entire system.

Vertext

Modern and thermoplastic, eliminates the use of monomer. Dryness, burning, allergic reactions are completely absent. The material is much stronger than analogues. Consequently, the basis is very thin. In turn, it increases the sensitivity of taste buds and articulation.

DeFlex

An Argentine company has made a breakthrough in dentistry by developing a polyamide that ensures complete transparency of the entire frame, including clasps. Transmitting light, it completely merges with the tissues of the oral cavity.

Widely used by athletes, police officers, and emergency services to provide jaw protection.

Nylon

The base is filled with soft nylon. 100% transparency ensures complete fusion with the mucous membrane. Clasps are made of the same material.

The patient quickly gets used to the foreign body in the mouth. High elasticity reduces stress on gums and soft tissues. The sufficient strength of the material used makes it possible to minimize the frame in order to maintain diction.

However, the pros turn out to be cons. To answer the described contradiction, it is important to understand the following question: how is a full-fledged nylon denture installed?

The thin and elastic component located at the base requires a mesh structure. When chewing hard food, fibers dig into the palate or gums, causing pain.

Advantages:

• quick addiction;
• 100% camouflage;
• biocompatibility.

Flaws:

• frequent hair loss requires you to always use fixing creams and ointments;
• chewing function – weak;
• expensive;
• lead to accumulation of plaque on the rough part;
• require adherence to a strict diet;
• the alveolar ridge bears the entire load.

Indications for use:

• partial edentia with preservation of supporting organs;
• in cases where aesthetics comes to the fore;
• The patient is allergic to acrylic.

So, we figured out how false jaws are made, the pros and cons of dental prostheses and various components. Let's move on to indications for the use of other types.

Indications for prosthetics

The main indications for dentures are:

• loss of one or more teeth as a result of illness, injury,
• serious defects in the dentition - chips, cracks, wide gaps between teeth,
• unstoppable erosion of tooth enamel,
• destruction of the crown of one or more teeth.

Some indications are subjective - for example, aesthetic defects such as uneven teeth, slight darkening or natural yellowness of the enamel. In such cases, there is often a desire to improve aesthetics, make teeth smoother, more uniform and more beautiful.

In all cases, the doctors at the Dental Master clinic will help you gain beauty and self-confidence, as well as restore chewing ability. We perform all types of prosthetics - quickly, efficiently and at affordable prices.

Immediate

Replace a unilateral included defect. The design can be created from any materials used in dentistry. Capable of restoring a row of holes. Also found under the name "butterflies".

Several artificial crowns are attached to a miniature base, secured with hooks and locks. Recommended as a temporary solution after removal of diseased masticatory organs.

For those who are going to install metal ceramics and do not have enough money, it helps to gain time to collect them. Some patients use it all their lives, replacing it with a new one after a few years.

Relevance of the problem – diversity of species

Dentistry is one of the oldest branches of medicine. Oddly enough, Pithecanthropus, Neanderthals, and our direct ancestors, the Cro-Magnons, had teeth pain. Already at the earliest stages of human history, the problem of replacing (prosthetics) a lost or fallen tooth arose. Until the beginning of the 19th century, practice followed the path of replacing like with like. The prosthesis was either a tooth of a deceased person of a suitable size or a tooth of an animal, ground to size. In rare cases, prosthetics were made from precious stones or metals.

Modern prostheses have incorporated technologies that make the design as light and cheap as possible. Ceramic metal, which was popular 10 years ago, is already a thing of the past. It is being actively replaced by polymers, which are not inferior in strength to metal and porcelain, but are an order of magnitude cheaper. In addition, most polymers can be repaired and restored in the event of loss of a component element. For each type of dentures, our own repair and restoration technologies have been developed. Not all of them can be reproduced at home.

Conditionally removable

Anyone who has ever gone to the dentist for dentures is concerned about how to make them, who makes and inserts dentures on hooks, what methods of fastening exist, and what they look like on the teeth.

The design received its name due to special fixation methods. Special crowns and clasps ensure a secure fit in the mouth. They will never fly out on their own. You can remove it using special skills (usually a dentist does this).

Clasp

This type of implant is described above. Additionally, 3 types of structures should be distinguished:

1. Clammers. The metal claw mount provides a secure fit and poor aesthetics.
2. Lock. Divided into two parts: the first on the side, the second on the inside. Installation of such a connection requires grinding of adjacent elements.
3. Telescopic. The inner crown is made of solid metal, onto which an outer structure (for example, ceramic) is placed.

Indications for use:

• edentia, in which at least 5 teeth are preserved;
• more than three units in a row are missing;
• mobile teeth (loose);
• other implants cannot be installed.

Quadrotti

Clasp or clasp without metal. Biocompatible plastic is at the core of the entire design.

Positive traits:

• there is no need to grind the supporting parts;
• the material does not cause allergies;
• cheap;
• the patient gets used to it easily;
• the chewing load is distributed correctly.

Negative qualities:

• despite greater stability compared to fully removable ones, the fixation is weak;
• the classic arc has high strength;
• service life is 3-4 years.

How a new generation of complete removable dentures are attached without a palate and what they are like

It is based on two materials:

• hard acrylic for bases and implants;
• soft polyurethane for fasteners.

At the base of the mechanism is an imitation of gum, which ensures a strong fixation. Dentists are still arguing about what type they should be: completely removable or not.

Prosthesis repair

There are two options for repairing an acrylic prosthesis:

In accordance with manufacturing technology:

• making a plaster cast;
• sequential technological actions associated with obtaining a sprue for spraying a hardening polymer composition;
• final grinding and polishing of the restored prosthesis.

Urgent repairs:

• Cleaning and degreasing broken prosthesis;
• Drying;
• Application of adhesive composition;
• Drying;
• Grinding and polishing of seams.

Which of these options to resort to is up to you. Before starting the repair, it should be noted: the cost of repairing an acrylic prosthesis in a dental workshop is 10-15% of the cost of making a new one. To technologically restore a prosthesis you will need to purchase:

• Polymer composition in the cartridge;
• High quality dental plaster;
• Vibrating table;
• Insulating varnish;
• Dental wax.

The cost of these materials is very high. The main problem is that they are not sold at retail. Order through companies or the Internet - go without teeth for at least 2 weeks.

Instant repair allows you to restore the integrity of the prosthesis for 5-10 days and wait for the opportunity to contact a professional - a dental technician.

What to choose if you are completely missing teeth

If the doctor has not identified any contraindications, separate implants are recommended. However, you can look towards removable or partially removable options.

Partial absence

Conducive to installing butterflies and crowns. Any of the methods described in the article is suitable for replacing a bite. Only a qualified specialist can provide the correct advice in each specific case.

For the upper and lower parts of the mouth

If we are talking about removable structures, plate options can be used at the top, and fixed ones at the bottom. This advice is based on the anatomical features of the jaw. However, only the doctor will provide the correct solution.

Which prosthesis can be repaired at home?

Not all prosthetic wearers have Lefty talents. Therefore, we will only talk about those prostheses that can be quickly repaired at home. And we will not load you with information about the repair of metal-ceramic or clasp structures.

Only the following can be repaired at home: full or partial acrylic dentures (rigid, made of plastic), temporary acrylic dentures .

• Soft nylon and acry free dentures cannot be repaired by yourself! And in a dental workshop, they can only repair minor damage to the structure. If a soft prosthesis bursts (tears) transversely, no one will restore it, unlike a hard one.
• Precious metal prosthetics require skills in working with high-temperature smelting furnaces. It is difficult to reach the melting temperature of gold or fluxes at home. It is even more difficult to work with ceramics, which require special compositions and high-temperature firing.
• It is also not possible to repair a clasp denture at home. Professional skills and complete or partial replacement of the entire frame are required. But making it at home is almost impossible.

Service life and care

Durability depends on materials, quality of installation and maintenance. The following tips will help you make it last as long as possible:

• every 6 months it is necessary to visit a doctor to assess the condition - especially when using rigid structures;
• 2 times a day you need to treat the oral cavity and removable jaws with a solution or rinse with clean water;
• follow individual recommendations received from your doctor.

The article answered the questions: what is a complete and partially removable denture, what types are there in dentistry, which are better, what the price depends on. It should be noted that the text is not a guide to action; its main purpose is to introduce the reader to the varieties. If you have any questions or pain, please contact your dentist.

Technicians' work

This manufacturing stage largely replicates the steps of the clinical process, since they are closely interrelated.

How dentures are made by technicians:

1. Making a cast from plaster.
2. Making an individual impression tray based on a plaster cast.
3. Production of diagnostic and working models.
4. Creating a duplicate of the working model.
5. Plastering of the working and auxiliary models in the articulation.
6. Placement of crowns on a wax base and filling with plastic.
7. Replacing the wax with a polymer base.
8. Assembly, polishing and grinding of the finished product.
9. Sending the finished product to the orthodontist.

Features of various cements for crowns

Table 1. Features of various cements for crowns

Cement for dental crowns

Causes of crown loss
What to do if a dental crown falls out

Cement for dental crowns

Features of various cements for crowns

Prevention of crown loss

To restore a badly damaged tooth, a crown is needed. This is an orthopedic structure in the form of a cap, which is attached to the tooth using special cement. It protects the tooth from damage and maintains its functionality. However, due to improper hygiene or unprofessionalism of the doctor, the crown may fall off. What to do if a dental crown falls out? Can I attach it myself? Or is it better to seek help from a doctor?