Is it possible to put braces on only one jaw?

To correct an abnormal bite, you can put braces on your teeth. Such orthodontic systems affect bone tissue, muscles and ligaments, and help slowly move teeth into the correct position. Many people are interested in the question: is it possible to put braces on one jaw? You will find the answer in this article.

What are braces?
Are braces placed on one jaw?
Main indications for partial correction
Orthodontic correction up to 12 years
Braces for the lower jaw only for mild crowding
Treatment for crowded upper anterior incisors
Closing the gap between the front incisors
Partial bracket system for preparation for prosthetics
Absence of chewing teeth on the opposite jaw
Should I install braces on one jaw or not?

What are braces?

A brace system is an orthodontic device that is installed on the teeth and helps them move in the desired direction. Structurally, this device consists of small plates (directly braces), which are glued to the dental crown at pre-calculated points, and a metal arch. This arc has shape memory and is an active element of the system. Fixed on the plates, it tries to regain its even position and thereby puts pressure on the teeth. As a result, their slow, gradual movement in the bone tissue occurs. Orthodontic treatment not only helps to correct the curvature of individual teeth in a row, it allows you to change the shape and position of the jaw, and restore facial symmetry.

It is preferable to begin orthodontic correction in childhood. But modern medical capabilities make it possible to carry it out even in adulthood and old age.

Most often, an orthodontic device is placed on two jaws at once. The dentist calculates in advance in which direction a particular tooth should move, how much it is necessary to expand the jaw or spread the dentition. Double-jaw treatment is comprehensive and allows you to solve global problems in occlusion correction. It usually takes from several months to several years.

Types of orthodontic appliances, design and materials

The design consists of the following elements - ligature, metal arches and elastic, braces made of metal or other materials. The device is used to transfer pressure to the surface of the row. This causes a restructuring of growth to give the row a normal position. The exerted force affects the movement of units in a row, allows you to correct it and eliminate growth pathologies.

The following types of constructions are used for correction:

Vestibular orthopedic devices are attached from the outside. They are visible when worn, but provide high results. The design does not have a negative effect on the enamel if the Patient follows the care recommendations.
Lingual systems are installed from inside the row. They are not noticeable when talking, but the cost of treatment will be higher due to more complex installation. In addition, an adjustment period is required, since at first the device may interfere.

The following materials are used for the manufacture of braces:

metal, characterized by affordable cost, durability, reduced treatment time;
ceramic, inconspicuous in appearance, durable, but susceptible to staining with food pigments;
silicone based on special plastic, these are transparent structures that are distinguished by high aesthetics, but are indicated for correcting minor pathologies and slight curvature;
sapphire transparent systems with high aesthetics, almost invisible on the enamel surface;
combined, for example, sapphire braces are used for the upper row, and ceramic or metal-based for the lower row.

Installation Features

Fixation order:

initial examination;
Carrying out diagnostics, identifying problems, calculating treatment regimens;
choice of design type;
installation of orthodontic braces (takes about 1-1.5 hours);
regular visits to the doctor to adjust the design;
removal of the device;
evaluation of the result and installation of a special structure to consolidate the result.

Price

We offer competitive rates for treatment and a free initial examination. The total cost of jaw braces depends on the following factors:

condition of the oral cavity, the presence of diseases subject to preliminary treatment;
performing office cleaning of plaque and stone deposits;
prescribed diagnostic measures, consultations with related specialists;
materials, type of construction, manufacturer;
installation, activation of the device (calculated for each jaw separately);
regular visits to tighten the arch and replace individual elements;
the use of special devices after correction with braces.

About Us

Magenta Dental Clinic is a modern dental clinic offering services such as eliminating dental pathologies and restoring a beautiful, sparkling smile without pain and in the shortest possible time. Patients are provided with:

modern methods of therapy;
use of certified materials and equipment;
full range of services, including diagnostics;
control of treatment, guarantee of results;
attentive attitude towards everyone, creation of comfortable conditions;
affordable cost of jaw braces;
free initial consultation with clinic doctors.

To make an appointment, leave a request on the website, indicating the coordinates for feedback. Call us at +7 (812) 242-91-90. You can also send a request for an appointment at a convenient time by email and consult with our doctors.

Are braces placed on one jaw?

Installing a brace system is one of the most common and effective methods for correcting an abnormal bite, improper closure of the teeth of the upper and lower jaw. Crooked teeth and abnormal jaw position not only spoil a person’s appearance, but also affect his health. Therefore, correcting the bite is important and necessary. But installing braces confuses many people.

Some are concerned about aesthetics, others are concerned about possible inconveniences when wearing the system, others simply want to save on orthodontic correction. And then the patient turns to the doctor with the following question: is it possible to install braces only on the upper jaw or only on the lower jaw.

As a rule, a person knows in advance which teeth he wants to change. And if they are located only on one jaw, then he expects that he will have a partial braces installed, only in the area of the curvature.

The doctor must make such a decision. It may seem to the patient that he has a problem only with the lower jaw, but the dentist sees during the examination that partial correction will not give an effective result. In this case, the orthodontist will insist on a complete correction. If you need a stable result of orthodontic treatment, we recommend listening to the professional opinion of an orthodontist.

Material for manufacturing orthodontic systems

The choice of material for orthodontic structures is quite wide:

metal;
plastic;
ceramics;
dental sapphire.

Metal ones are the cheapest. Metal braces look scary, but they are one of the best in terms of treatment effectiveness. The metal does not stain when worn, does not bend or break.

Patients try to choose inconspicuous structures made of plastic/ceramics/sapphire for the upper jaw. However, everything has its own characteristics. For example, plastic braces begin to turn yellow over time and may not withstand the load - they break. Such designs can be worn for no more than six months with a slight curvature of the row.

Ceramics are more resistant to stress compared to plastic. Ceramic braces can be almost invisible if the color of the material is matched to the tone of the enamel. Sapphire braces are made from a special crystal grown under certain conditions. Such hardware structures are not inferior in strength to metal ones and are not noticeable. The whole issue is the high price.

Main indications for partial correction

In some cases, it is indeed possible to place braces on one jaw, and this approach will be effective. As a rule, these are situations where the teeth are only crooked at the top or bottom, but the bite is not broken and there is no facial asymmetry. Partial correction may be recommended for the following indications:

one or two teeth are positioned incorrectly;
slight crowding of teeth (lack of space - up to 3 mm);
a gap between the front incisors in the absence of pathological closure of premolars and molars;
correction of the position of teeth before installing dentures;
the need to avoid sagging of the upper teeth when their antagonists (opposite units) in the lower jaw are absent.

Diagnostics will show how effective braces will be only on the upper jaw or, conversely, on the lower jaw. It should include a visual examination, x-rays, assessment of the condition of bone tissue and dental roots.

Let's consider cases when it is justified to place braces separately on the upper jaw and separately on the lower jaw.

Location of braces on implants and dentures

Adult patients often worry that they will not be able to install braces if they have a large number of fillings or crowns in their mouth. There are no contraindications in this case, but it is worth understanding that braces on artificial material may have a worse hold. As a result, the patient will need to visit the orthodontist more often than usual. This is necessary to assess the condition of the oral cavity and the tightness of the staples to the enamel surface.

The situation with implants is different. In the event that the implantation was performed 4 by 4 or 3, treatment with braces will most likely be impossible. This is explained by the fact that titanium artificial roots grow too closely with the bone tissue, so it will not be possible to displace them like ordinary roots.

Of course, one implant may not be a serious obstacle to orthodontic treatment, but all cases are considered on an individual basis. If there is a need for implantation, but the implant has not yet been installed, it is better to first correct the bite and only then implant an artificial root and install a prosthesis.

Orthodontic correction up to 12 years

Braces are primarily used for children starting in their teens. This is due to the fact that by the age of 11-12 years the formation of the jaws is completed, and the primary bite is replaced by a permanent one. But often, an orthodontist discovers bite problems in a child at an earlier age. Installing partial braces helps solve some of them, as well as prepare teeth for further correction in adolescence.

The doctor can place an orthodontic device on one jaw or individual teeth in order to:

create space for the eruption of permanent teeth;
expand one of the jaws;
close the gap between the front incisors (the so-called diastema);
correct the incorrect position of one or more teeth that are bothering the child;
preserve the space left after early removal of baby teeth, which neighboring ones are trying to occupy.

Thus, braces can be placed on one jaw at the age of 9-10 years to solve a specific orthodontic problem. In this case, in adolescence, further, already double-jaw, treatment will be required.

Additional methods and alternatives to braces treatment

A number of patients do not tolerate wearing braces well. Therefore, modern orthodontics invents and offers alternative treatment methods for use. Deviations from the norm when closing the teeth are insignificant; local irregularities in the dentition are perfectly corrected by aligners and elastopositioners. These are modern orthodontic devices in the form of a mouth guard made of absolutely harmless and bioinert material. They can be removed, they are transparent, do not change color when worn and do not absorb foreign odors, they are easy to care for.

The aligner is used to get rid of various types of abnormal bites. An elastopositioner is a multifunctional device in orthodontics, used to stimulate the growth of the lower jaw, wean children from bad habits, or if the child has mouth breathing.

And also for snoring or to consolidate the results of treatment as a retention structure. Only a doctor can determine which system or device is suitable in each specific case. The choice of braces or their alternative depends on the diagnosis and degree of pathology, as well as the individual preferences of the patient.

Braces for the lower jaw only for mild crowding

Crowding is the position of teeth when they are too close to each other. As a result, rotation, curvature, and “layering” of each other occur. If slight crowding is observed only on the lower front incisors, while the upper front incisors are positioned evenly and the lateral ones close correctly, in this case, braces are sometimes placed only on the lower jaw. An important condition for this method is that there must be enough space to move horizontally so that the teeth can take the correct position. This treatment method is chosen in cases where the lack of space for alignment is less than 3 mm. With this method, separation of the front incisors is almost always performed - that is, minor grinding of the contact surfaces, which allows you to free 0.25 mm from each surface and in total create those missing 1-3 mm for alignment in the dentition.

Advantages and disadvantages of installing braces on both jaws

The invention of braces completely changed all previously existing views on aesthetic dentistry. Patients were able to effectively and quickly correct pathologies of the position of teeth and bite, without resorting to highly traumatic surgical interventions.

Meanwhile, orthodontic treatment with braces also has a number of disadvantages. These include:

the presence of a wide range of contraindications to the procedure (cardiological, oncological, endocrine, allergic, mental diseases, periodontal disease, development of inflammatory processes, alcoholism, etc.);
long duration of the adaptation period (after installation of an orthodontic device, the patient experiences pain and discomfort for a long time, and encounters problems with diction);
deterioration in the aesthetics of a smile (except for those cases when lingual invisible braces are used to correct the position of teeth and bite);
the emergence of difficulties during hygienic procedures;
the appearance of minor injuries to the oral mucosa;
the need to follow a special diet (avoiding too hard, viscous foods, etc.);
relatively high cost of treatment involving the use of braces.

Meanwhile, all of the listed shortcomings quickly lose significance against the background of the achieved results. A beautiful facial contour, a healthy and even smile become a truly worthy reward for all the difficulties that the patient has to cope with during treatment.

Treatment for crowded upper anterior incisors

Braces on the upper jaw only can be placed if crowding is observed on the upper front incisors. The conditions are the same - the space deficit should be no more than 2-3 mm. In addition, treatment should not require expansion of the dentition. In this case, for orthodontic correction it is not necessary to involve the lower dentition.

If you provide space for uneven teeth by expanding the upper row, this will disrupt the closure. As a result, the teeth will “seek contact” with each other, the upper row will become narrow again, and in the long term the goal of orthodontic treatment will not be achieved. Therefore, if it is necessary to expand the upper row of teeth in order to correct crowding, a partial braces system cannot be used; a two-jaw apparatus will have to be installed. Braces can only be placed on the upper jaw if space for teeth is freed up using the separation method (their width is reduced by grinding the contact surfaces).

Kinds

The following types of materials are used to make braces:

metal structures, characterized by an affordable price for braces for both jaws, durability, easy installation and adjustment;
ceramic, inconspicuous, durable, preserving the aesthetics of the frontal area;
silicone transparent, characterized by high aesthetics, but indicated for the correction of minor pathologies, slight curvature;
sapphire systems based on a single crystal, which have high aesthetics and are almost invisible on the enamel surface;
combined, for example, transparent ceramic or sapphire braces are used for the top row, and metal-based for the bottom row.

Closing the gap between the front incisors

Braces can be placed on the lower jaw if there is a large gap (diastema) between the lower front incisors. In this case, several conditions must be met:

the lateral teeth close together normally;
there is an opportunity for a “joint to joint” closure of the front teeth of the upper and lower rows.

If these conditions are not met, it may be necessary to artificially increase the size of those teeth between which there is a gap. This is done using filling material. If the patient is not ready to fill healthy teeth in order to increase their size, then single-jaw treatment of diastema will not suit him, since the doctor will not be able to guarantee the stability of the result.

Braces or mouthguards - which is better?

What to do if only one tooth is crooked? This occurs in the practice of orthodontists. If your bite is normal, your doctor may suggest removable clear aligners. Such structures are placed on a molar or incisor that does not have enough space on the jaw. Typically, aligners are worn for only a few months. However, mouthguards are not used in all cases: if the tooth has turned to the side, treatment with braces is prescribed. Typically, canines and front incisors are corrected with mouthguards.

Placing transparent aligners is much cheaper. But is the question of price always justified? Let's look at the advantages of braces over removable aligners:

The bracket system puts constant pressure on the tooth, which speeds up the process of straightening the curvature.
With the help of removable structures (alignments), it is problematic to achieve ideal evenness of the dentition.
Braces are more convenient to use than mouthguards.
Braces do not affect pronunciation: the patient does not have a lisp.

How long does it take to correct the bite and teeth using braces? This usually takes a period of ten months. For children, the period of wearing orthodontic structures doubles - this is due to the eruption of all permanent molars.

Partial bracket system for preparation for prosthetics

Sometimes braces are placed on only one jaw in preparation for prosthetics or in order to close empty spaces from extracted teeth. In the first case, braces help change the angle of the teeth to make room for an implant or bridge. In the second case, the brace system is used to move the posterior chewing tooth to the place of the previously removed one, thereby closing the empty gap and avoiding prosthetics. It is important to note that such treatment is usually complex and lengthy (tooth movement can take up to four years).

The orthodontist decides how appropriate it is to install a partial brace system for such indications in each specific case.

When is it necessary to install braces?

A bracket system is an orthodontic device consisting of a bracket plate with a recess for an arch. The main tasks of the orthodontist are to make the physiological closure of the jaws, return the units to anatomical positions, and give the smile a natural and beautiful appearance.

Standard system includes:

Bracket. A plate fixed to the coronal part of the unit with specialized material.
Wings or castle. A recess is formed for the passage of the orthodontic arch.
Arc. A horseshoe-shaped wire made of an alloy of various metals, along which the teeth are directed.
Ligatures. Rubber bands or wire connecting the braces and the arch.

The purpose of this treatment is to straighten teeth and correct jaw abnormalities. An improvement in the bite can be noted after 6-8 months.

Indications for therapy with braces:

malocclusion;
violation of the symmetry of facial features;
large gaps between units;
lack of space in the dentition;
injuries of the maxillofacial area or TMJ disease (pain, crunching when chewing or closing the jaws);

Restrictions on the use of equipment:

many non-removable orthopedic structures;
in women, pregnancy and breastfeeding;
blood diseases;
lung pathologies;
immunodeficiency states;
inflammatory diseases of the extremities (rickets, arthrosis, arthritis);
cancer.

Which braces are best for different age categories? Teenagers and adults are fixed with equipment of different models. It is important to choose systems with the attending physician, taking into account age, the anomaly itself, etc.

Should I install braces on one jaw or not?

If the patient is concerned about the question of whether braces are placed on the lower jaw, then the answer will be positive. An orthodontic device can be installed not only on the lower or upper jaw, but also on individual teeth or areas of the dentition. But the main question is whether such treatment would be advisable. As a rule, installing a brace system on one jaw solves exclusively local dental problems. This process is more difficult to control and provides fewer treatment options. If contraindications are not provided, even a successful result will be short-lived, and the teeth will return to their previous position.

Thus, a dentist planning single-jaw orthodontic treatment must carefully assess the risks, take into account the many factors that will influence tooth movement and predict in advance the effectiveness and stability of the result.

If the doctor sees that solving the problem with a partial braces system will be problematic, he will recommend double-jaw treatment to the patient. Its advantages are that teeth can move in different planes without negative effects such as disruption of contacts between the upper and lower ones. Plus, such treatment is easier to predict and control, and it gives a more sustainable result.

Features of choosing a brace system for the lower jaw

Since the upper teeth are more visible when talking and smiling, this removes many aesthetic restrictions when choosing an orthodontic design for the lower jaw. Therefore, doctors recommend focusing on the effectiveness and duration of treatment.

Among the features of straightening teeth of the mandibular row the following are noted:

The lower teeth are more crooked than the upper teeth.
Correcting pathologies of the lower dentition takes less time.
The load on the lower teeth is greater, so you need to choose durable and high-quality systems.

Metal, sapphire or ceramic braces can be placed on the lower jaw row. But plastic systems are not recommended. The latter are characterized by low strength and reliability, and quickly break under heavy loads.